Wolkenstein WT3-90-A+BR handleiding
Handleiding
Je bekijkt pagina 70 van 93
~ 70 ~
2.6 Electrical connection
Check that the voltage indicated on the rating plate matches the mains voltage of
your home before you connect the extractor hood to the mains.
Check that the extractor hood is installed properly before you connect the
appliance to the mains.
NOTICE! Any damage caused by an appliance that is improperly
connected to the mains is not covered by the warranty or guarantee.
3. Recirculation mode / Extraction mode
3.1 Extraction mode
WARNING! Do not lead the exhaust air into a chimney which is used
for extracting exhaust air of appliances operated by gas or other
combustibles.
❖ The extractor hood is usually ready for the use in extraction mode (modifications
are possible).
❖ In extraction mode, the intake air is led through an exhaust hose to the outside.
For this purpose, an exhaust shaft or an outwardly leading exhaust pipe must be
available in your home.
If your appliance is equipped with a carbon filter, you must remove the carbon
filter before you operate the appliance in extraction mode!
If you want to use the extractor hood in extraction mode, please always observe
the instructions given in chapter 2. INSTALLATION et seq. and in chapter 2.5.2
INSTALLATION OF THE EXTRACTOR HOOD: step 4. « EXTRACTION MODE », step
7 a. and step 9.
3.2 Recirculation mode
❖ You can also use the appliance in recirculation mode.
❖ If you do not use an exhaust air pipe to the outside for the installation of the
extractor hood, the exhaust hose is not required.
❖ In recirculation mode, the exhaust air is led back into the kitchen (s. fig. below).
Bekijk gratis de handleiding van Wolkenstein WT3-90-A+BR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wolkenstein |
| Model | WT3-90-A+BR |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 14815 MB |
