Wolkenstein WS49-90B handleiding
Handleiding
Je bekijkt pagina 75 van 89
~ 75 ~
❖ Use the « ILLUMINATION » - SENSOR to switch on / off the LED ILLUMINATION of
the extractor hood.
HOW TO SWITCH ON THE LED ILLUMINATION
1. Touch the « ILLUMINATION » - SENSOR once briefly to switch on the LED
illumination of the extractor hood.
2. The LED illumination is switched on.
HOW TO SWITCH OFF THE LED ILLUMINATION
1. Briefly touch the « ILLUMINATION » - SENSOR once again to switch off the LED
illumination of the extractor hood.
2. The LED illumination is switched off.
WARNING! The LED illuminant / illuminants must not be covered by
thermal insulation or other materials. RISK OF FIRE!
CAUTION! Do not touch the LED illuminant / illuminants within 30
minutes after using the appliance. RISK OF BURNS!
NOTICE! Only switch on the LED illumination while the appliance is
operating. Do not switch on the LED illumination to illuminate the room.
TIMER
❖ The extractor hood is equipped with a timer. The countdown time of the timer
is set to 5 minutes at the factory and cannot be changed. After the 5 minutes
have elapsed, the appliance switches off automatically.
HOW TO ACTIVATE THE TIMER
1. Touch the « ON / OFF » - SENSOR to switch on the extractor hood.
2. The extractor hood now is in OPERATION MODE.
3. Choose the power levels ,Touch the « TIMER » - SENSOR.
4. The timer is activated.
5. The appliance switches off automatically after 5 minutes.
HOW TO DEACTIVATE THE TIMER PREMATURELY
Bekijk gratis de handleiding van Wolkenstein WS49-90B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wolkenstein |
| Model | WS49-90B |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 14160 MB |
