Wolkenstein WKG456ENFDIX handleiding
Handleiding
Je bekijkt pagina 69 van 101
~ 69 ~
NOTICE! The rollers (depending on model) are no castors and intended
to move the appliance forward and backwards only. Lateral movements
can damage your floor and the rollers.
3.4 Change of the hinge position
WARNING! Switch off and unplug the appliance before changing the
hinge position. RISK OF ELECTRIC SHOCK!
CAUTION! The change of the position must be carried out by at least
two persons; otherwise, you may hurt yourself or damage the appliance.
NOTICE! You should contact a qualified technician if you want to have
the door swing reversed. Only try to carry out the steps described below
when you are sure that you are qualified to do so.
NOTICE! Adjust the doors properly before you finally tighten the screws of
the hinges. The seals must close properly.
NOTICE! Do not tilt the appliance more than 45°.
PREPARATORY MEASURES
➢ Empty the appliance.
➢ If possible, remove all door trays, glass shelves, drawers, etc.
24
from the appliance
so that they cannot be damaged.
➢ It is necessary to tilt the appliance backwards while removing the doors. Lean the
appliance against a solid and immovable surface so it will not slip while changing
the hinge positions.
➢ Do not lay the appliance flat as this can damage the cooling system.
➢ All parts removed must be saved for proper reinstallation of the doors.
➢ Always remove the doors carefully. Keep the doors in a safe place so that they
cannot be damaged.
TOOLS REQUIRED (NOT INCLUDED IN THE SCOPE OF DELIVERY)
FLAT BLADED SCREWDRIVER
PHILLIPS SCREWDRIVER
HEXAGON WRENCH
24
Depending on model.
Bekijk gratis de handleiding van Wolkenstein WKG456ENFDIX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wolkenstein |
| Model | WKG456ENFDIX |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 15624 MB |
