Wolkenstein WFD400ENFDWB handleiding
Handleiding
Je bekijkt pagina 49 van 75
49
3. Install the appliance in a suitable position with an adequate distance from sources
of heat and cold.
4. If the appliance is positioned beside another fridge or freezer, leave at least a free
space of 2.0 cm between the appliances in order to avoid condensation.
5. Check that the appliance and the power cord are not damaged.
6. Install the appliance in a dry and well-ventilated place.
7. Protect the appliance from direct sunlight.
8. The doors must open completely and without hindrance.
9. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
10. Connect the appliance to the mains properly.
11. The nameplate is situated inside the appliance or at the back.
3.2 Ventilation
Observe the required minimum distances for proper ventilation.
NOTICE! Fix the plastic wall spacers (depending on model) on the
condenser at the back of the appliance to ensure a ventilation gap
between the appliance and the wall.
MINIMUM DISTANCES REQUIRED FOR PROPER VENTILATION:
Back ↔ wall
min. 20 mm
Sides ↔ wall
min. 20 mm
Free space above
min. 100 mm
The following minimum distances are recommended by the manufacturer to ensure
optimum efficiency of the appliance:
Back ↔ wall
min. 50 mm
Right / left ↔ any piece of furniture / wall
min. 100 mm
Free space above
min. 300 mm
These minimum distances may be less, but to do so can increase the power
consumption of the appliance.
Bekijk gratis de handleiding van Wolkenstein WFD400ENFDWB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wolkenstein |
| Model | WFD400ENFDWB |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 11322 MB |
