Handleiding
Je bekijkt pagina 65 van 72
~ 65 ~
Tepid water and neutral detergents are recommended to clean the
appliance, while abrasive products should be avoided.
The power cord shall be replaced by authorized personnel only.
Replacement of Halogen lamps WS90370S_S-2, WS90390S_S-2
To replace the halogen lamps, remove first the glass-blocking ring (Fig.12A),
by levering with a screw-driver and thus removing the opaque glass (Fig.12B)
- when performing this operation hold the opaque glass
carefully. Remove
the lamp (Fig.12C) without touching it with uncovered hands. Replace it with
another lamp of the same kind. After the replacement, re-insert the glass-
blocking ring and fasten it.
Square lamps WS90370S_S-2, WS90390S_S-2
To replace the bulbs in the square lights, press the light frame where it says
“PUSH” (fig. 13 / 14), then replace the bulb and press the frame back into
place.
Fluorescent lamp (neon) replacement WS90752S_S-2, WS90770S_S-2
To replace the fluorescent lamps you need to open the perimeter panel, by
rotating it as shown in Fig. 1, remove the panel fixing screws (fig. 17), paying
special care in holding it during this step, then remove the lamps and replace
the damaged one (fig. 18).
Insert the panel again.
Bekijk gratis de handleiding van Witt WS90390, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Witt |
| Model | WS90390 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 7040 MB |
