Handleiding
Je bekijkt pagina 24 van 44
24
SECTION OF THE SUPPLY CABLE
TYPE “H05V2V2-F”
resistant to temperatures of 90°C
220-240 V 50/60 Hz 3 x 0,75 mm
2
(*) (**)
(*) Connection possible with plug and outlet
(**) Connection with wall box connection.
REPLACING THER POWER SUPPLY CABLE
WARNING: If the power supply cable is damaged, it must be replaced only by an
authorized service agent in order to avoid a hazard.
To connect the supply cable:
• Unhook the terminal board cover by inserting a screwdriver into the two hooks “A” (g.
3.1).
• Open the cable gland by unscrewing screw “F” (g. 3.2), unscrew the terminal screws
and remove the cable.
• The new supply cable, of suitable type
and section, must be connected to the
terminal board following the diagram in
g. 3.3.
• Close and hook again the terminal
board cover.
NOTE: The earth conductor must be left
about 3 cm longer than the others.
A
F
Fig. 3.2 Fig. 3.3
E
N (L
2)
L
1
Fig. 3.1
F
Bekijk gratis de handleiding van Witt WGH604GOG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Witt |
| Model | WGH604GOG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3949 MB |
