Handleiding
Je bekijkt pagina 11 van 24
11
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don’t touch the heating zones and don’t put any
heat sensitive object on them. There are risks of burn and fire.
Booster and double booster function
Booster [ P ] and Double Booster [ ] grant a boost of Power to the selected heating zone.
If this function is activated the heating zones work during 5 minutes with an ultra-high Power.
This is foreseen for example to heat up rapidly big quantities of water, like noodles.
• Start-up / Stop the Booster:
Action Control panel Display
Start up the Booster Slide to the end of the “SLIDER” [ P ]
or press directly on the end of
the “SLIDER”
Stop the Booster Slide on the “SLIDER“ [ 9 ] to [ 0 ]
• Start-up / Stop Double Booster
Action Control panel Display
Start up the Booster Slide to the end of the “SLIDER” [ P ]
or press directly on the end of
the “SLIDER”
Start-up Double Booster Re-press on the end of the “SLIDER” [ and P ]
Stop the Double Booster Slide on the “SLIDER“ [ P ] to [ 0 ]
Stop booster Slide on the “SLIDER“ [ 9 ] to [ 0 ]
• Power management:
The total cooking hob is equipped with an overall maximum of Booster power. When the Booster
function is activated, the electronic system automatically regulates all “Boosters” selected to
equalise the available power to each element selected for booster. The display is blinking on [ 9 ] for
a few seconds and then shows the maximum of power allowed :
Heating zone selected The other heating zone: (example: power level 9)
[ P ] is displayed [ 9 ] goes to [ 8 ] and blinks
Timer
The timer is able to be used simultaneous with all heating zones and this with different time
settings from 1 minute to 1 hour and 59 minutes (displayed [ 1.59 ]) for each heating zone.
• Setting and modification of the cooking time:
Action Control panel Display
Select a zone Press a zone [ 0 ]
Select the power level Slide on the “SLIDER“ [ 1 ] to [ P ]
Select the Timer Press key [ ] Timer displays [ 0.00 ]
Increase the time Press key [ + ] from the timer [ 0.50 ]
Decrease the time Press key [ - ] from the timer Time in Min. decrease
After a few seconds, the [ ] display stops with blinking.
The time is confirmed, and the timer starts.
Bekijk gratis de handleiding van Witt WEP78FS2W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Witt |
| Model | WEP78FS2W |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2393 MB |
