Handleiding
Je bekijkt pagina 26 van 60
26
SAFETY INSTRUCTIONS
The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or
wrong operation of the device. Please inspect the device and packaging when receiving it to ensure
that everything is intact and that it is safe to operate. If you find damage, please contact the dealer you
bought it from.
Please not that for your own safety it is not permitted to make changes to the device. Unwarranted use
may result in danger and the loss of warranty.
Please read these instructions carefully before using/starting the device and store these instructions
close to the place of installation or the device for later use.
Safety warnings
Your safety is important to us. Please read these instructions before using your hob plate. Please follow
the instructions in this manual carefully. There is no liability for any problems, damage or fires caused by
failures to comply with the instructions in this manual. The device is only intended for household use,
cooking and the absorption of fumes generated while cooking.
No other uses are permitted (such as, for example, using it to heat a room). The manufacturer accepts no
liability from unwarranted use or incorrect settings.
The product may have different aesthetic expressions compared to the illustrations in these instructions,
but the operating, maintenance and installation instructions will remain the same.
Installation
• Disconnect the device from the power supply before carrying out any work or maintenance on it.
• It is critical and mandatory to attach the device to a good grounding system.
• Changes to the wiring system may only be carried out by a qualified electrician.
• Failure to comply with this recommendation may result in electric shock or death.
• Installation and maintenance work must be carried out by qualified technicians in accordance with the
manufacturer’s instructions and local safety provisions. Do not repair or replace any part of the device
unless this is specifically stated in the operating instructions.
• It is mandatory to ground the device.
• The power cord must be long enough to allow for the attachment of the device to the electrical
network.
• To ensure that the installation complies with relevant safety standards, it is required to use a regular
omnipolar switch that ensures a complete decoupling from the power supply under category III
overvoltage conditions in accordance with the installation rules.
• Do not use multiple sockets or extension cords. When the installation is completed, the electrical
components must be inaccessible to the user.
• Before the device is attached to the electric network: Make sure that the connections are in accordance
with the connection data (voltage and frequency) specified on the type plate. It is very important that
this data matches so that the hood is not damaged. When in doubt, contact a professional.
Bekijk gratis de handleiding van Witt Classic Heat 80 R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Witt |
| Model | Classic Heat 80 R |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6240 MB |
