Handleiding
Je bekijkt pagina 32 van 84
32
EN
Water box
Anti-slip clips
Water lter parts
Connect the water
pipes of water box
with lter
Water pipes
Connectors
Rubber plugs
Water lter
(Water flow direction)
(Water flow direction)
Water source
Waterleiding
Waterpipe
Take of the rubber plug
3.3 REPLACING THE LED LIGHTING
Replacement or maintenance of the LED lighting must be carried out by the manufacturer, its maintenance
representative or an equivalent qualied person.
3. Remove the rubber plugs on both
sides of the water box.
4. Remove the water lter from
the accessory bag, insert the
connectors on both sides of the
lter, then connect the water pipe
and clamp it into the anti-slip clips
(note the direction of the arrow on
the lter). Connect the water pipe
and clamp it into the anti-slip clips
(note the direction of the arrow on
the lter).
5. Mount the water lter parts with the
mounting bracket above the water
box and connect the water pipes
from the water box to the water
lter.
6. Remove the rubber plug. Connect the water pipe section with the connector to the main valve on the compressor
cover and remember to t the anti-slip clips, then connect the end of the water pipe to the water source with the
nut.
How to use the dispenser can be found in chapter 4.4: “How to use the dispenser?”.
Bekijk gratis de handleiding van Wisberg WBSBSWID576DZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wisberg |
| Model | WBSBSWID576DZ |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 9617 MB |
