Handleiding
Je bekijkt pagina 27 van 72
27
EN
1. Check that the dimensions of the hob cutout meet the minimum
dimensions. The hob cutout ensures good heat dissipation and
prevents overheating of the appliance.
A. > 5 cm
B. > 3 cm
C. > 5 cm
B
C
A
A
2. Check that the dimensions of the surface meet the minimum
dimensions.
D. 49 cm
E. 56 cm
F. > 5 cm
E
D
F
F
3. Check that the air inlets and outlets are not blocked and that they
meet the minimum dimensions.
G. 60 cm
H. 5 cm
I. 2 cm
J. Air inlet
K. Air outlet
G
K
H
I
J
4. Place the appliance with the control panel facing down on the
packaging.
5. Stick the sealing tape provided onto the bottom of the appliance
along the entire outer edge. Make sure the sealing tape overlaps
so that there are no cracks between the different sections of
sealing tape.
6. Place the appliance in the hob cutout.
7. Check that the appliance fits fully in the hob cutout and that the
glass plate makes full contact with the surface.
The appliance is correctly placed if it fits in the hob cutout and the glass
plate makes full contact with the surface.
8. Place a thermal protective barrier at the bottom of the appliance.
9. Remove the protective film from the glass plate.
3.5. CONNECTING THE APPLIANCE
WARNING!
ELECTROCUTION HAZARD DUE TO SHORT CIRCUIT. Always have the appliance installed by an authorised service
technician.
The WBBC460FZF2/WBBC470FZF2 is provided with a 5-pole Perilex wire. The plug is not included.
Have an authorised service technician connect the Perilex plug to the appliance.
Connecting the Perilex is done in the meter cabinet and you should not do it yourself.
Bekijk gratis de handleiding van Wisberg WBBC460FZF2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wisberg |
| Model | WBBC460FZF2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5663 MB |
