Winix HR950 handleiding
Handleiding
Je bekijkt pagina 9 van 144
Operating the air cleaner | Operation
9
English
HR 950
①
Insert the power cord into the socket ( ) at the rear of the unit, and
plug into an electrical outlet ( ).
x
The Control Panel lights will turn on and o.
②
Press the [Power] button.
▶
During the first 4 minutes of power up,
the Air Quality light will flash as the
Smart Sensors measure the air quality in
the environment, after which normal
operation will begin.
③
By default, when the unit first powers on, the mode will be set to Auto
with PlasmaWave® enabled.
x
When in Auto Mode the fan speed will be automatically adjusted according to the
environments air quality.
x
PlasmaWave® works to remove harmful airborne contaminants.
▶
In Auto mode, as the indoor air quality improves, the fan speed
will automatically be reduced to Low.
▶
When the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave®, it is normal and does not signify product failure. To
disable PlasmaWave®, see page 11.
INITIAL OPERATION
Bekijk gratis de handleiding van Winix HR950, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Winix |
| Model | HR950 |
| Categorie | Luchtreiniger |
| Taal | Nederlands |
| Grootte | 14375 MB |