Wilfa Lun Miljø PLE-750 handleiding
Handleiding
Je bekijkt pagina 98 van 111
EngelskEngelskEnglish
10 P.
EngelskEngelskEnglish
1010 P.
Setting the desired room temperature
The night time reduc-
tion must be activated
at the desired time,
for example at 10PM
and will reduce the
temperature from the
chosen
How The display shows Check that
Briefly press the up arrow
once. Increases by one degree
for each press. Min. 5°C and
max. 40°C.
22ºC +1 flashes
off
off
I Briefly press the down ar-
row once. Decreases by one
degree for each press. Min.
5°C and max. 40°C.
22ºC –1 flashes
off
off
The display shows
the current room
temperature after
5 seconds
on/off
on/off
The indicator light returns to the previous settings.
Programming night time reduction
Step 1:
How The display shows Check that
Press down once (4 sec)
Shows 17 degrees or
previously pro-
grammed tempera-
ture. Flashes for 5 sec.
on/off
flashes
Programming the night reduction.
Step 2:
The display shows Check that
The display shows the room temperature. The indicator
lamp for daytime goes out.
off
on
Step 3:
The display shows Check that
The display shows the current room temperature.
on/off
on
When the temperature for night time reduction has been reached, the display will
show the room temperature and the indicator lamp for night time shows that it is
programmed for night mode.
The night time reduction cannot be set whilst daytime reduction is active.
Bekijk gratis de handleiding van Wilfa Lun Miljø PLE-750, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wilfa |
| Model | Lun Miljø PLE-750 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8498 MB |
