Wilfa Lun Miljø PLE-750 handleiding
Handleiding
Je bekijkt pagina 96 van 111
EngelskEngelskEnglish
8 P.
EngelskEngelskEnglish
88 P.
Daytime and night time reduction mode
The heater is equipped with programs which make it possible to
reduce the temperature during the daytime and in the night time
when you are asleep. This allows you to save both the environment
and electricity by having a lower temperature when you are not
using the room or you are asleep. Please refer to the programming
overview for daytime and night time reduction.
Child lock
It is possible to block the use of the function buttons and adjustment
buttons, to prevent unwanted changes to the programming and the
temperature. Please refer to the programming overview for child lock.
Frost guard
The function enables you to maintain a temperature of 8°C in the
room. This function can be used for longer absences from the home.
Please refer to the programming overview for frost guard.
Memory function
The heater is equipped with a memory so that all programming is
saved. This means that you do not have to re-program next season.
This will save you time when you want to use the heater.
The heater is not equipped with a battery, however, so the date and
time have to be set for every season or every time it is turned on.
(Follow the installation guidelines on page 9). If, however, you do not
wish to use the various power saving functions, press “P” three times.
The factory settings for time and date will then be used. The heater
will then be controlled using the thermostat. When the frost guard is
selected, it does not depend on the time as it is constantly on.
What to do in the event of power failure, if the pow-
er plug is disconnected or if the heater is turned off
After the heater has been without power for more than 1 minute you will
need to set the time and date in order to use the heater and all functions
again. (Follow the installation guidelines on page 9). This is to ensure
that the power saving functions start as planned. We recommend that
the heater is left on for the period during which you require heating. If
you go away for prolonged periods, we recommend that you use the
various settings to reduce the power consumption. However, if shorter
power failures of less than 1 minute occur you will need to confirm by
pressing “P” three times in order to use all functions again.
Bekijk gratis de handleiding van Wilfa Lun Miljø PLE-750, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wilfa |
| Model | Lun Miljø PLE-750 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8498 MB |
