Wilfa Lun Miljø PLE-750 handleiding
Handleiding
Je bekijkt pagina 108 van 111
EngelskEngelskEnglish
20 P.
EngelskEngelskEnglish
2020 P.
Maintenance
To maintain the heater’s efficiency and prevent dust accumula-
tion in the grates at the front and the underside, these should be
vacuumed or brushed occasionally. Minimum twice a year (spring
and autumn). To make it easier to clean behind the heater, the
heater can be tilted forward by squeezing the locking system at
the top of the wall bracket.
In polluted environments, dirt can quickly accumulate on the
grates. This could be the result of poor air quality. Accumulation
of dirt is not covered by warranty in accordance with the heater’s
warranty.
The heater’s external surfaces can be cleaned using a soft, damp
cloth. Never use abrasive cleaners as this could damage the
heater’s surface.
Specifications
MODEL POE-500 POE-750 POE-1000 POE-1250 POE-1500
EFFECT 500 750 1000 1250 1500
VOLTAGE 230V,AC/50Hz
MODEL PLE-500 PLE-750 PLE-1000 PLE-1250
EFFECT 500 750 1000 1250
VOLTAGE 230V,AC/50Hz
Troubleshooting
PrOBLEM Possible causes Solution
The heater
is not heat-
ing
– Inspect the plug
– The main switch could be
turned off
– The thermostat has been
incorrectly adjusted
– Plug into the power socket
– Turn on the main switch
– Ensure that the thermostat is
correctly adjusted
The heater
heats for the
entire time
– The thermostat has been
incorrectly adjusted
– Heaters have been installed on
a cold wall or are influenced
by a draft
– Ensure that the thermostat is
correctly adjusted
– Calibrate the thermostat. See
programming overview on
page 9
Bekijk gratis de handleiding van Wilfa Lun Miljø PLE-750, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wilfa |
| Model | Lun Miljø PLE-750 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8498 MB |
