Wilfa Fresh AP-120W handleiding
Handleiding
Je bekijkt pagina 10 van 114
8
INSTRUCTION MANUAL · FRESH
EN
UV-C/AUTO BUTTON
• Press the button to turn on the UV light.
• Press the button one more time to turn on the AUTO mode. The air purier
automatically changes the speed according to the air quality detected by
the dust sensor.
• Press a third time to turn off the UV light.
• Press a fourth time to turn off the AUTO mode.
• Press and hold this button for 3-5 seconds to enter night mode. In night
mode all indicator lights switch off, and the speed is on the lowest setting.
• Press any button to end night mode.
TIMER BUTTON
Press this button to set a timer. Choose between 2, 4 or 8 hours. When the time
is up, it stops automatically.
INSTALLING AND REMOVING FILTERS
FILTER REPLACE INDICATOR
When the lter replace indicator light lights up, it is time to replace the lter.
Replace the lter according to the directions below. Then press and hold the
POWER button for 3-5 seconds to restart the system, and the lter replace
indicator light will turn off.
1. Turn the unit upside down.
2. Screw out the screw on the bottom.
3. Remove the base cover.
4. Remove the lter and replace it with a new lter.
5. Place the base cover and insert the screw before you turn the unit.
Note: The combination lter will last approximately 6 months.
Bekijk gratis de handleiding van Wilfa Fresh AP-120W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wilfa |
| Model | Fresh AP-120W |
| Categorie | Luchtreiniger |
| Taal | Nederlands |
| Grootte | 9290 MB |