Wilfa DAPPER 1800 ST2B-200 handleiding
Handleiding
Je bekijkt pagina 9 van 76
9
STEAMER · ST2B-200
EN
BEFORE USE
• Remove all labels, tags and stickers attached to the appliance, cord or power
plug of the steamer.
• Read all the instructions carefully before use.
Fabric brush
• The magnetic fabric brush easily attaches to the front of the steamer.
• Ensure the brush and steamer are cool before attaching or removing the brush.
Filling the water tank
1. Hold the handle for support and pull out the removable water tank with the other
hand.
2. Gently open the rubber cover at the top.
3. Using a clean measuring cup, pour approx-
imately 200ml water into the water tank.
Securely close the rubber cover.
• If you live in an area with hard water, we
recommend using distilled, demineral-
ised or filtered water.
• Do not use water with perfumes or scent-
ed additives.
4. Wipe off any excess water before placing
the tank back into the steamer.
5. To refill during use:
• Turn the steamer off by pressing the pow-
er button, unplug from the socket, and
follow the steps above to refill the tank.
Tip: If the steamer fails to reheat after 45 seconds, prime the pump by holding the
steam trigger button until steam forms.
USE
1. Always check the garment label before steaming! If in doubt, test the steamer on
a hidden area of the fabric first to ensure it responds well to steam.
Usage
Suitable for garments that allow
medium to high heat and steam.
Helps remove lint, hair and pet hair
Bekijk gratis de handleiding van Wilfa DAPPER 1800 ST2B-200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wilfa |
| Model | DAPPER 1800 ST2B-200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5391 MB |
