Wilbur Curtis TCC2 handleiding
Handleiding
Je bekijkt pagina 12 van 12
Printed in U.S.A. 7/2012 F-3480 Rev N
WILBUR CURTIS CO., INC.
6913 Acco St., Montebello, CA 90640-5403 USA
Phone: 800/421-6150 Fax: 323-837-2410
Technical Service Phone: 800/995-0417 (M-F 5:30A - 4:00P PST) E-Mail: techsupport@wilburcurtis.com
Web Site: www.wilburcurtis.com
FOR THE LATEST SPECIFICATION INFORMATION GO TO WWW.WILBURCURTIS.COM
Product Warranty Information
TheWilburCurtisCompanycertiesthatitsproductsarefreefromdefectsinmaterialandworkmanshipundernormal
use.Thefollowinglimitedwarrantiesandconditionsapply:
2Years,Parts,fromOriginalDateofPurchaseonallttingsandtubing.
1Year,Labor,fromOriginalDateofPurchaseonallttingsandtubing.
StainlessSteelcomponentsarewarrantedfortwo(2)yearsfromdateofpurchaseagainstleakingorpittingandreplacementparts
arewarrantedforninety(90)daysfromdateofpurchaseorfortheremainderofthelimitedwarrantyperiodoftheequipmentinwhich
the component is installed.
Allin-warrantyservicecallsmusthavepriorauthorization.ForAuthorization,calltheTechnicalSupportDepartmentat1-800-995-
0417.EffectivedateofthispolicyisApril1,2003.
Additionalconditionsmayapply.Gotowww.wilburcurtis.comtoviewthefullproductwarrantyinformation.
CONDITIONS & EXCEPTIONS
Thewarrantycoversoriginalequipmentattimeofpurchaseonly.TheWilburCurtisCompany,Inc.,assumesnoresponsibilityfor
substitutereplacementpartsinstalledonCurtisequipmentthathavenotbeenpurchasedfromthe
WilburCurtisCompany,Inc.TheWilburCurtisCompanywillnotacceptanyresponsibilityifthefollowingconditionsarenotmet.The
warrantydoesnotcoverandisvoidunderthefollowingcircumstances:
1) Improper operation of equipment: The equipment must be used for its designed and intended purpose and function.
2) Improper installation of equipment: This equipment must be installed by a professional technician and must comply with
all local electrical, mechanical and plumbing codes.
3) Improper voltage: Equipment must be installed at the voltage stated on the serial plate supplied with this equipment.
4) Improper water supply: This includes, but is not limited to, excessive or low water pressure, and inadequate or uctuating
water ow rate.
5) Adjustments and cleaning: The resetting of safety thermostats and circuit breakers, programming and temperature adjust-
ments are the responsibility of the equipment owner. The owner is responsible for proper cleaning and regular maintenance
of this equipment.
6) Damaged in transit: Equipment damaged in transit is the responsibility of the freight company and a claim should be made
with the carrier.
7) Abuse or neglect (including failure to periodically clean or remove lime accumulations): The manufacturer is not
responsible for variation in equipment operation due to excessive lime or local water conditions. The equipment must
be maintained according to the manufacturer’s recommendations.
8) Replacement of items subject to normal use and wear: This shall include, but is not limited to, light bulbs, shear disks,
“0” rings, gaskets, silicone tube, canister assemblies, whipper chambers and plates, mixing bowls, agitation assemblies and
whipper propellers.
9) Repairs and/or Replacements are subject to our decision that the workmanship or parts were faulty and the defects
showed up under normal use. All labor shall be performed during regular working hours. Overtime charges are the respon
sibility of the owner. Charges incurred by delays, waiting time, or operating restrictions that hinder the service technician’s
ability to perform service is the responsibility of the owner of the equipment. This includes institutional and correctional
facilities. The Wilbur Curtis Company will allow up to 100 miles, round trip, per in-warranty service call.
RETURN MERCHANDISE AUTHORIZATION: All claims under this warranty must be submitted to the Wilbur Curtis Company
Technical Support Department prior to performing any repair work or return of this equipment to the factory. All returned equip-
ment must be repackaged properly in the original carton. No units will be accepted if they are damaged in transit due to improper
packaging. NO UNITS OR PARTS WILL BE ACCEPTED WITHOUT A RETURN MERCHANDISE AUTHORIZATION (RMA).
RMA NUMBER MUST BE MARKED ON THE CARTON OR SHIPPING LABEL. Allin-warrantyservicecallsmustbeperformed
byanauthorizedserviceagent.CalltheWilburCurtisTechnicalSupportDepartmenttondanagentnearyou.
12
7/23/12@12.5 . ECN 14129
8/3/11@8.0 . ECN 13382
Bekijk gratis de handleiding van Wilbur Curtis TCC2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wilbur Curtis |
| Model | TCC2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1978 MB |
