Wiesenfield WIE-PM-3200 handleiding
Handleiding
Je bekijkt pagina 27 van 258
EN
of the device. If damage is discovered, hand over the device for repair before
use.
g) Keep the device out of the reach of children.
h) Device repair or maintenance should be carried out by qualified persons, only
using original spare parts. This will ensure safe use.
i) To ensure the operational integrity of the device, do not remove factory-
fitted guards and do not loosen any screws.
j) When transporting and handling the device between the warehouse and the
destination, observe the occupational health and safety principles for manual
transport operations which apply in the country where the device will be
used.
k) Avoid situations where the device stops working during use due to excessive
loading. This may result in overheating of the drive elements and damage to
the device.
l) Do not touch articulated parts or accessories unless the device has been
disconnected from the power source.
m) Do not move, adjust or rotate the device in the course of work.
n) Do not leave this appliance unattended while it is in use.
o) Clean the device regularly to prevent stubborn grime from accumulating.
p) The specified vibrations emission was measured using standard
measurement methods. Vibrations emissions may change if the device is
used in different surroundings.
q) The device is not a toy. Cleaning and maintenance may not be carried out by
children without supervision by an adult person.
r) It is forbidden to interfere with the structure of the device in order to change
its parameters or construction.
s) Keep the device away from sources of fire and heat.
t) Do not cover the ventilation openings!
u) NOTE: During operation, some elements of the device become very hot –
scalding hazard!
v) Do not touch the moving cutting elements. Danger of cutting or amputating
fingers/limbs.
w) Do not start the machine before loading the material.
x) Do not use the machine with a clogged die.
y) Regularly check the oil level and the lubrication of the bearings.
z) Do not throw hard materials such as iron cuttings, coal, wood, pebbles,
bones, stones etc. into the machine.
aa) Do not use the device during rain, storm or snowfall.
bb) Before each use, check and tighten all screws.
cc) For the production of pellets, do not use raw materials with a moisture
content exceeding 15%.
Bekijk gratis de handleiding van Wiesenfield WIE-PM-3200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wiesenfield |
| Model | WIE-PM-3200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 44613 MB |
