Wiesenfield WIE-PM-2700 handleiding
Handleiding
Je bekijkt pagina 42 van 296
EN
Bearings too poorly
lubricated.
Lubricate them thoroughly.
The speed is too high.
Wrong roller selection or
defective motor.
Worn bearing.
Replace with new ones.
4. The raw material
is discharged
through the air
intake (on the
housing).
The flow of raw material is
too fast or uneven.
Adjust the amount of raw
material fed to the machine.
The voltage and therefore
the engine speed are too
low
Check and adjust the engine.
The material tube leading
to the outlet is clogged
Clean the pipe.
The air intake is too high or
too low
Adjust the inlet holes with
the knob on the housing.
Bekijk gratis de handleiding van Wiesenfield WIE-PM-2700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wiesenfield |
| Model | WIE-PM-2700 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 63234 MB |
