Wiesenfield WIE-PM-2700 handleiding
Handleiding
Je bekijkt pagina 40 van 296
EN
• Install in the reverse order of removal. Carefully re-tighten the
installed bolts.
m) Replacing the hammer mill plates:
• Open the machine housing in the same way as in the previous point
(see above).
• Dismantle the used grinder plates by removing the bar locking clips
("pin" in the picture below):
• Pull out the bar with the plates ("lateral axis" in the picture above).
There are 4 plates on each bar, and there are 4 bars in total.
• Install new plates in the reverse order of removal. If the safety clips
are damaged during disassembly, install new ones (not included) by
bending them at the open end (the "pin" in the picture above).
DISPOSAL OF WASTE APPLIANCES
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
Bekijk gratis de handleiding van Wiesenfield WIE-PM-2700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wiesenfield |
| Model | WIE-PM-2700 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 63234 MB |
