Wiesenfield WIE-PM-2700 handleiding
Handleiding
Je bekijkt pagina 32 van 296
EN
B. Mill drum
C. Control panel
D. Drive train
E. Electric motor
F. Suction tube
G. Turbine housing
H. Top chute
I. Separator centrifuge
J. Emergency stop
K. Lower chute
3.2. Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed the range of 10-40°C, and the relative
humidity should not exceed 95%. Place the unit in a way that ensures good air
circulation. Maintain a minimum safety distance of at least 1m from each wall of the
unit. Keep the unit away from any hot surfaces. Always operate the unit on a level,
stable, clean, fireproof and dry surface and out of the reach of children and persons
with impaired mental, sensory and intellectual functions. Place the unit in such a
way that the mains plug can be reached at any time. Ensure that the power supply
to the unit corresponds to that specified on the identification plate!
ASSEMBLY OF THE DEVICE
1. The inlet of the raw material hopper (A) should be screwed to the inlet housing
at the opening, using the screws attached to the ends of the opening in the
housing.
2. Screw the pipe adapter (a) with the collar (b) to the outlet from the turbine
housing (G):
Bekijk gratis de handleiding van Wiesenfield WIE-PM-2700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wiesenfield |
| Model | WIE-PM-2700 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 63234 MB |
