Wiesenfield WIE-PM-2700 handleiding
Handleiding
Je bekijkt pagina 27 van 296
EN
2. Safety of use
CAUTION! Read all safety warnings and instructions. Failure to follow the warnings
and instructions may result in electric shock, fire, and/or serious injury or death.
The term "device" or "product" in the warnings and the description of the instructions
refers to:
Hammer mill
2.1. Electrical safety
a) The device is connected to the three-phase system with a power extension
cord. The plug of the extension cord device must fit into the outlet. Do not
modify the plug in any way. Original plugs and matching outlets reduce the risk
of electric shock.
b) Avoid touching grounded parts, such as pipes, heaters, ovens, and
refrigerators. There is an increased risk of electric shock if your body is
grounded and touches the device while exposed to direct rain, wet pavement,
or while working in a damp environment. If water enters the device, there is
an increased risk of damage to the unit and electric shock.
c) Do not touch the device with wet or damp hands.
d) Do not use the power extension cord improperly. Never use it to carry the
device or to pull the plug out of the socket. Keep the cord away from heat
sources, oil, sharp edges, or moving parts. Damaged or tangled cords increase
the risk of electric shock.
e) When operating the product outdoors, use an extension cord designed for
outdoor use. Using an extension cord designed for outdoor use reduces the
risk of electric shock.
f) If you cannot avoid using the product in a wet environment, use a residual
current device (RCD) to connect the product to electrical mains. Using an RCD
reduces the risk of electric shock.
g) Do not use the unit if the power extension cord is damaged or shows obvious
signs of wear. A damaged extension cord should be replaced by a qualified
electrician or at the manufacturer's service center.
h) To avoid electric shock, do not immerse the extension cord, the plug, or the
appliance itself in water or any other liquid. Do not use the appliance on wet
surfaces.
i) Due to the significant current consumption during motor start-up, it is
recommended that the motor be restarted after a few-minute break.
Bekijk gratis de handleiding van Wiesenfield WIE-PM-2700, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wiesenfield |
| Model | WIE-PM-2700 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 63234 MB |
