Wiesenfield WIE-PD-120 handleiding
Handleiding
Je bekijkt pagina 12 van 150
EN
6. Turn on the Device
Switch the Power Button to the “ON” or “TIME” position.
7. Set the Desired Temperature
Adjust the Temperature Control Knob to a heat setting suitable for pollen drying (typically 30–40°C).
If available, use an oven thermometer (not included) to monitor the internal temperature for accuracy.
Adjust as needed to maintain a consistent drying environment.
8. Set the Drying Time
Turn the Timer Knob to the desired drying duration.
If continuous operation is required, ensure the device remains on by switching to the “ON” position.
9. Preheat Before Loading Racks
Preheat the product for 5–10 minutes before loading the Racks back into the Cabinet.
10. Secure the Door
Attach the door to the Cabinet by aligning it with the top lip of the Cabinet. Ensure the sides of the door
are closed securely to maintain proper airflow and temperature stability.
11. Manage Condensation
During operation, small water droplets may form on the surface of the pollen. Carefully blot these with a
clean towel or paper towel to prevent moisture buildup. Use caution, as parts of the product may become
hot during use.
NOTICE! Drying times may vary depending on several factors, including relative humidity, ambient air
temperature, and the thickness of the pollen layer on the Racks. The actual operating temperature of the
product is influenced by the ambient temperature (recommended 70°F or 21°C). If the product is used in an
environment where the ambient temperature differs significantly from 70°F (21°C), the temperature indicated
on the Temperature Control Knob may not be fully accurate. Adjustments to the temperature settings may be
necessary to maintain optimal conditions for pollen drying.
Operation tips
1. Avoid Overlapping Pollen: Spread pollen evenly and flat on the drying trays to ensure proper airflow and
even drying.
2. Monitor Dryness: Begin checking the pollen after 6 hours, then every 2 hours until it is fully dry and free of
any visible moisture.
3. Ensure Complete Dryness: Inspect the pollen to confirm it is thoroughly dried before removing it from the
dryer. Open or inspect a few samples for internal dryness. If any moisture remains, continue drying until
fully dry.
4. Label and Document: Label each container with the pollen type, date of drying, and initial weight. Maintain
a journal to refine your drying techniques and record observations for future batches.
5. Proper Storage:
Allow the pollen to cool before packaging.
Use airtight containers for storage, as proper sealing is critical for maintaining quality.
Pollen can be stored longer in a cool, dark, and dry location. The ideal storage temperature is 60°F
(16°C) or lower.
Bekijk gratis de handleiding van Wiesenfield WIE-PD-120, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wiesenfield |
| Model | WIE-PD-120 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 19797 MB |
