Wiesenfield WIE-FS-205A handleiding
Handleiding
Je bekijkt pagina 69 van 481
7. Start tractor and raise mower just enough to remove blocks.
8. Slowly engage tractor hydraulic 3-Point control lever to lower mower. Check
for sufficient drawbar clearance. Move drawbar ahead, aside or remove if
required.
9. Raise and lower implement to find maximum extended driveline length. Check
to make certain that the driveline overall length does not exceed the maximum
recorded length in step 2.
10. If needed, set tractor 3-Point lift height to keep driveline from exceeding
maximum allowable length.
Check Driveline Interference
Refer to Figure 1-5:
Maximum PTO Driveline Movement During Operation (Figure 1-5)
1. Slowly engage tractor hydraulic 3-Point control lever to lower mower while
checking for sufficient drawbar clearance. Move drawbar ahead, aside, or remove
if required.
2. Raise and lower implement to find maximum extended driveline length. Check
to make certain the driveline does not exceed the maximum allowable length and
25°up or down.
Bekijk gratis de handleiding van Wiesenfield WIE-FS-205A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wiesenfield |
| Model | WIE-FS-205A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 64030 MB |
