Wiesenfield WIE-CHP-420 handleiding
Handleiding
Je bekijkt pagina 10 van 87
EN
Factory setting temperature is 48 degrees Celsius; Heating plate will automatically control the
heating system to work according to the set temperature, and heating will start automatically when
temperature is 1 °C lower than the set temperature; When temperature reaches the set temperature,
heating will automatically stop (the set temperature and height of the heating plate interior space can
be adjusted according to ambient temperature.
Temperature Setting Method:
Press the setting key, the number "48" flicker; Then press "+" to increase the temperature,
press "-" to decrease the temperature, and then press the "set” key to save or automatically save in
ten seconds.
Sensor Error Indication:
When the temperature sensor fails or is disconnected, the temperature display window
displays EE, and the electric heating stops working at the same time.
V: Cautions
NOTE! This product should only be used indoors or in brooder box. The ventilation
environment will affect the product performance. Try to keep the product in a closed area.
1. The power cord must be plugged firmly to avoid bad contact and damaging the machine.
2. The upper main control panel and heating system are forbidden to be washed with water, and
it is strictly forbidden to touch water.
3. If the product picture is inconsistent with the actual product, the actual product shall prevail.
Bekijk gratis de handleiding van Wiesenfield WIE-CHP-420, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wiesenfield |
| Model | WIE-CHP-420 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 21818 MB |
