Wiesenfield WIE-BK-56 handleiding
Handleiding
Je bekijkt pagina 16 van 115
EN
Honey gate valve: place the gate valve in the drilled hole from the outside of the tank and tighten it.
Place the lids on both sides of the tank:
3.4. Device use
Step 1:
Turn counterclockwise the speed control knob to "MIN". Set the ON/OFF switch to "O". Set the rotation
direction change switch to “O”. connect the plug to the power supply.
Step 2:
Put the bee frames (honeycombs) into the frame holder of the inner basket. Always place the frames in
pairs - on opposite sides of the tank to ensure the balance while in operation.
Step 3:
Close the lids.
Step 4:
Set the Rotation Direction Switch to (rotating clockwise). Turn clockwise the speed control knob to
the required speed.
Once it is over, turn the power switch to the Position “O”, turn rotation direction change switch back to
the Position “O”, and turn the speed control knob to "MIN". When the baskets stop working, open the lid
and check the honeycomb content in the tank.
If there is still honey in the honeycomb, repeat the Steps 3 & 4.
If there is no honey in the honeycomb, proceed to next step.
Step 5:
Close the lids.
Bekijk gratis de handleiding van Wiesenfield WIE-BK-56, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Wiesenfield |
| Model | WIE-BK-56 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 26789 MB |
