Handleiding
Je bekijkt pagina 10 van 40
10
Keypad Feature Instructions
Cook Menu Auto cook For Cook Menu mode, it is not necessary to set the time and power,
follow the instructions below:
1. Press “Cook Menu” button, the “P1” will show on the display.
2. Use “+/-” button or “Cook Menu” to select a food category. See
the Cook Menu section in this guide for the food category or
reference sticker on the front plate of the microwave.
3. Press START button.
4. Sensor Cooking: A sensor in the microwave oven detects
humidity released from the food as it heats and adjusts the cook
time accordingly.
NOTE: During the cooking process, the display will show to Turn or
Add Food (for some food only), press the STOP/UNLOCK button
to trigger the unlock function and add or turn the food using door
release button to open the door. By pressing the STOP/UNLOCK
button again will stop the cooking function and microwave oven will
switch to Standby mode.
Soften Menu Soften The Soften function is used to soften food. To use:
1. Press “Soften Menu”, the display will show “P1”.
2. Use “Soften Menu” button or “+/-” button to select a food
category,
see the Soften Menu section in this guide for the food category
or reference the sticker on the front plate of microwave. Press
START button to conrm.
3. Use “+/-” button to adjust the quantity.
4. Press START button.
Melt Menu Melt The Melt function is used to melt food. To use:
1. Press “Melt Menu”, the display will show “P1”.
2. Use “Melt menu” button or “+/-” button to select a food category,
see the Melt Menu section in this guide for the food category
or reference the sticker on the front plate of microwave. Press
START button to conrm.
3. Use “+/-” button to adjust the quantity.
4. Press START button.
Keep Warm Keep Warm The function allows to keep your dishes warm. To use:
1. Press “Keep Warm” button, default time “30:00” will show on the
display.
2. Press “Keep Warm” or “+/-” button to select 15minutes,
30minutes, 45minutes, or 60minutes.
3. Press START button.
NOTE: The Keep Warm cycle last for a duration of 15minutes
(default 30minutes), the maximum time is 60minutes.
Each 15minutes cycle, microwave will be turned on 1.5minutes,
then cavity lamp and fan are off, only the countdown time is shown.
Steam Clean Auto cleaning cycle The cleaning cycle will help to clean the microwave oven cavity.
1. Place 1cup of water (~250mL) on the middle of the cavity.
2. Press “Steam Clean” button, default “13:00” time will show on
display.
3. Press START button to start the function.
(After nishing the water heat-up cycle (3minutes), the cavity
lamp and fan will be off, the countdown time is shown.)
NOTE: Please follow Tips and Suggestions in Steam Clean section.
Tone ON/OFF Turn on or off beep sound The function allows to turn on or off the beep sound:
1. Press Steam Clean button and hold for 5seconds to put into
mute, the Tone Off icon will be shown on display.
2. Hold the button again for 5seconds to turn on the sound.
Bekijk gratis de handleiding van Whirlpool YWMCS7022RS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | YWMCS7022RS |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 4058 MB |
