Whirlpool WS Q3560 CPNE handleiding

Fornuis

Whirlpool

81 pagina's

PDF beschikbaar

Handleiding

COOKING TABLE

CLEANING AND MAINTENANCE

POWER LEVEL TYPE OF COOKING

LEVEL USE

(indicating cooking experience and habits)

Maximum power

P Fast heating/Booster

Ideal for rapidly increasing food temperature to a fast boil (for water) or for rapidly

heating cooking liquids.

8 − 9 Frying − boiling Ideal for browning, starting to cook, frying deep frozen products, fast boiling.

High power

7 − 8

Browning − sautéing − boiling −

grilling

Ideal for sautéing, maintaining a lively boil, cooking and grilling (for a short period of

time, 5-10 minutes).

6 − 7

Browning − cooking − stewing −

sautéing − grilling

Ideal for sautéing, maintaining a light boil, cooking and grilling (for a medium period

of time, 10-20 minutes), preheating accessories.

Medium power

4 − 5

Cooking − stewing − sautéing −

grilling

Ideal for stewing, maintaining a gentle boil, cooking (for a long period of time).

Creaming pasta.

3 − 4

Cooking − simmering − thickening

− creaming

Ideal for long-cooking recipes (rice, sauces, roasts, sh) with liquids (e.g. water, wines,

broth, milk), creaming pasta.

2 − 3

Ideal for long-cooking recipes (less than a litre in volume: rice, sauces, roasts, sh) with

liquids (e.g. water, wines, broth, milk).

Low power

1 − 2

Melting − defrosting − keeping food

warm − creaming

Ideal for softening butter, gently melting chocolate, thawing small products and

keeping just-cooked food warm (e.g. sauces, soups, minestrone).

Ideal for keeping just-cooked food warm, for creaming risottos and for keeping

serving dishes warm (with induction-suitable accessory).

Zero power 0 Support surface

Hob in stand-by or o mode (possible end-of-cooking residual heat, indicated by

an “H“).

WARNING

• Do not use steam cleaning equipment.

• Before cleaning, make sure the cooking zones are switched o and that the residual heat indicator (”H”) is not displayed.

Important:

• Do not use abrasive sponges or scouring pads as they may damage the

glass.

• After each use, clean the hob (when it is cool) to remove any deposits and

stains from food residue.

• A surface that is not kept suitably clean may reduce the sensitivity of

control panel buttons.

• Use a scraper only if residues are stuck to the hob. Follow the scraper

manufacturer's instructions to avoid scratching the glass.

• Sugar or foods with high sugar content can damage the hob and must be

immediately removed.

• Salt, sugar and sand could scratch the glass surface.

• Use a soft cloth, absorbent kitchen paper or a special hob cleaner (follow

the Manufacturer’s instructions).

• Spills of liquid in the cooking zones can cause the pots to move or vibrate.

• After cleaning the hob, dry thoroughly.

If the CleanProtect logo is present on the glass, the hob has been treated with

CleanProtect technology. This exclusive coating ensures excellent cleaning

results and keeps the hob surface shiny for longer.

Daily cleaning after each use is suggested.

To clean CleanProtect hobs, follow these recommendations:

• Soak the zones that need to be cleaned with water making sure to

cover the entire stained area and being careful not to drop water on

the control panel.

• For the water soaking:

• In normal conditions, wait at least 2 minutes.

• In heavy-dirt conditions, wait for at least 5 minutes.

• If the water dries on the hob it is necessary to repeat the soaking step.

• Use a non-abrasive sponge to remove deposits and dry the hob after

cleaning.

The cooking table oers an example of the cooking type for each power level. The actual delivered power of each power level depends on the cooking zone

dimension.

Induction hobs may whistle or creak during normal operation.

These noises actually come from the cookware and are linked to the pan

bottoms' characteristics (for example, when the bottoms are made from

dierent layers of material or are irregular).

These noises may vary according to the type of cookware used and the amount

of food it contains and not the symptom of something wrong.

SOUNDS PRODUCED DURING OPERATION

INDICATORS

RESIDUAL HEAT

If “H“ appears on the display, this means that the cooking zone is hot. The

indicator lights up even if the zone has not been activated but has been heated

due to the adjacent zones' use or because a hot pot has been placed on it.

When the cooking zone has cooled down, the ”H” disappears.

POT INCORRECTLY POSITIONED OR MISSING

This symbol appears if the pot is not suitable for induction cooking, is not

positioned correctly or is not of an appropriate size for the cooking zone

selected. If no pot is detected within 30seconds of making the selection, the

cooking zone switches o.

Bekijk gratis de handleiding van Whirlpool WS Q3560 CPNE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.