Handleiding
Je bekijkt pagina 10 van 40
10
Freezer Door
1. Remove the screw cover.
2. Remove the freezer handle assembly as shown below. Keep
all parts together.
A. Screw Cover C. Freezer Handle
B. Handle Screw D. Flat-Head Handle Screw
3. Remove door hinge hole plug from freezer door. Move to
opposite side hinge hole as shown below.
A. Door Hinge Hole Plug
4. Remove the brand badge using the plastic tool (provided).
Replace it with the badge provided in the Reversibility Kit
located inside the crisper drawer. For proper placement, see
the Brand Badge Placement template (the last page of this
manual).
NOTES:
� To avoid scratching the finish, do not use a sharp or
metallic object to pry the brand badge from the door.
� Rub a small amount of liquid dish soap over any adhesive
residue with your fingers. Rinse the door with warm water
and dry with a soft cloth.
5.
A. Door stop screw B. Door stop
6. Remove door stop. Move to opposite side of refrigerator door
as shown.
7. Refer to image in Step 2. Position freezer handle on opposite
side of the freezer door. First, drive the bottom two screws into
handle. Align upper portion of handle and drive top screw into
handle.
8. Tighten all screws. Set aside door until hinges and refrigerator
compartment door are in place.
9. Replace screw cover. Refer to image in Step 2.
Refrigerator Door
1. Remove the screw cover.
2. Remove refrigerator handle assembly as shown below. Keep
all parts together.
A. Flat-Head Handle Screw C. Handle Screw
B. Refrigerator Handle D. Screw Cover
3. Remove door hinge hole plug from refrigerator door. Move to
opposite side hinge hole as shown below.
A. Door Hinge Hole Plug
4. Remove door handle sealing screws. Move to opposite side of
refrigerator door as shown.
A. Door Handle Sealing Screws
5. Remove door handle hole plug and discard. Replace on
opposite side with the door handle hole plug provided in the
Reversibility Kit located in the crisper.
6. Remove door stop. Move to opposite side of refrigerator door
as shown below.
A. Door Stop Screw B. Door Stop
7. Refer to image in Step 2. Position refrigerator handle on
opposite side of the refrigerator door. First, drive top two
screws in handle first. Align lower portion of handle and drive
bottom screw into handle.
8. Tighten all screws. Set aside refrigerator door until bottom
hinge is installed on refrigerator.
9. Replace screw cover.
Bekijk gratis de handleiding van Whirlpool WRTX5328PW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WRTX5328PW |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 8972 MB |
