Handleiding
Je bekijkt pagina 15 van 64
15
Removing and Replacing the Ice Storage Bin:
1. Pull the covering panel up from the bottom.
2. Move the ON/OFF rocker switch to the OFF (O) position.
3. Lift up the front of the storage bin and pull it out.
4. Replace the bin by pushing it in all the way or the dispenser
will not work.
5. To restart ice production, move the ON/OFF rocker switch to
the ON (I) position Make sure the door is closed tightly.
Water Filtration System
Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the
system. Systems certified for cyst reduction may be used on
disinfected waters that may contain filterable cysts.
Water Filter Status Light
The water filter status light will help you know when to change
your water filter. This is located on the refrigerator control panel.
To order a replacement water filter see the Online Ordering
Information section of your Quick Start Guide for contact
information.
Changing the Water Filter
Style 1 – Top-right corner location:
1. Locate the water filter in the top-right corner of the refrigerator
compartment.
2. Remove exterior filter plug.
3. When plug is removed. Twist the filter counterclockwise, then
pull the filter straight out.
NOTE: There may be some water in the filter. Some spilling
may occur. Use a towel to wipe up any spills.
4. Take the new filter out of its packaging and remove the cap.
Be sure the O-rings are still in place after the cap is removed.
A B
B
A. Cap
B. O-rings
5. With the filter knob symbol pointing away from the lock
symbol, align the new filter with the filter housing and slide it
into place. Turn the filter knob clockwise until the knob symbol
aligns to the lock symbol.
6. Push the plug back into position over the filter.
7. After changing the filter, reset the filter status light.
8. Flush the water system. See “Water and Ice Dispensers” for
details.
Style 2 – Base grille location (automatic ejection):
A. Water filter cover door
1. Locate the water filter cover door in the base grille, and pull
open the filter door. The filter will be released and then be
ejected as the door is opened.
2. When the door is completely open, pull the filter straight out.
NOTE: There may be some water in the filter. Some spilling
may occur. Use a towel to wipe up any spills.
3. Take the new filter out of its packaging and remove the covers
from the O-rings. Be sure the O-rings are still in place after the
covers are removed.
4. With the arrow pointing to the left (toward the filter cover
door’s hinge), align the new filter with the filter housing and
slide into place. The filter cover door will automatically begin to
close as the new filter is inserted.
5. Close the filter cover door completely in order to snap the filter
into place. You may need to press hard.
6. Flush the water system. See “Water and Ice Dispensers” for
details.
Bekijk gratis de handleiding van Whirlpool WRSF5536RW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WRSF5536RW |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 14648 MB |
