Handleiding
Je bekijkt pagina 10 van 35
10
Keypad Feature Instructions
Cook Cook Menu To use auto cook presets, follow the instructions below:
1. Press “Cook” button, the “P01” will show on the display.
2. Press “Cook” button or keypad 0-9 button to select a food class,
P01...P04.
3. Press START button.
4. Sensor Cooking: A sensor in the microwave oven detects
humidity released from the food as it heats and adjusts the cook
time accordingly. (For non-sensor cooking, the display will show
the default weight. Press the keypad 0-9 button to adjust desired
weight. Press the START button).
NOTE: See the “Cook Menu” section in page #13 of this guide for the
food category or reference sticker on the front plate of the microwave
which you can see it after opening the oven door.
Soften Soften Menu The Soften function is used to soften food. To use:
1. Press “Soften”, the display will show “P01”.
2. Use “Soften” button or keypad 0-9 button to select a food
category. Press START button to conrm.
3. Use keypad 0-9 button to adjust the quantity.
4. Press START button.
NOTE: See the “Soften Menu” section in page #14 of this guide
for the food category or reference sticker on the front plate of the
microwave which you can see it after opening the oven door.
Melt Melt Menu The Melt function is used to melt food. To use:
1. Press “Melt”, the display will show “P01”.
2. Use “Melt” button or keypad 0-9 button to select a food category.
Press START button to conrm.
3. Use keypad 0-9 button to adjust the quantity.
4. Press START button.
NOTE: See the “Melt Menu” section in page #14 of this guide for the
food category or reference sticker on the front plate of the microwave
which you can see it after opening the oven door.
Keep Warm Keep Warm The function allows to keep your dishes warm. To use:
1. Press “Keep Warm” button, default time “30:00” will show on the
display.
2. Press “Keep Warm” or keypad 0-9 button button to select
15 min, 30 min, 45 min, or 60 min.
3. Press START button.
NOTE: The Keep Warm cycle last for a duration of 15 minutes
(default 30 minutes), the maximum time is 60 minutes.
Each 15 minutes cycle, microwave will be turned on 1.5 minutes,
then cavity lamp and fan are off, only the countdown time is shown.
Steam Clean Auto cleaning cycle The cleaning cycle will help to clean the microwave oven cavity.
1. Place 1 cup of water (~250 mL) on the middle of the cavity.
2. Press “Steam Clean” button, default “13:00” time will show on
display.
3. Press START button to start the function.
(After nishing the water heat-up cycle (3 minutes), the cavity
lamp and fan will be off, the countdown time is shown.)
NOTE: See the “Steam Clean” section in page #15 of this guide and
follow Tips and Suggestions accordingly.
Tone ON/OFF Turn on or off beep sound The function allows to turn on or off the beep sound:
1. Press Keep Warm button and hold for 3 seconds to put into
mute, the Tone Off icon will be shown on display.
2. Hold the button again for 3 seconds to turn on the sound.
Bekijk gratis de handleiding van Whirlpool WMCS7022SZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WMCS7022SZ |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 3905 MB |
