Handleiding
Je bekijkt pagina 9 van 56
9
Keypad Feature Instructions
NOTE: This microwave comes with the added feature of a 2-step door
opening functionality to avoid unintended access. When children do not
have access to the appliance, there is a disable function if the 2-step
functionality is not needed.
Disable/Enable 2-step door function operation on the display:
Steps to disable the 2-step door function operation:
1. After pressing the STOP/UNLOCK button for 3 seconds, “DI:_0” will
show on the display.
2. After pressing the “0” button, “DI:_1” will show on the display.
3. Press the START button to confirm.
NOTE: DI (Disable)
NOTE: If you unplug the microwave, it will remember the last operation. You
will not need to disable or enable the 2 step door function again. Steps to
enable the 2-step door function operation:
Steps to enable the 2-step door function operation:
1. After pressing the STOP/UNLOCK button for 3 seconds, “EA:_0” will
show on the display.
2. After pressing the “0” button, “EA:_1” will show on the display.
3. Press the START button to confirm.
NOTE: EA (Enable)
IMPORTANT: Disabling this feature should only be done when the owner is
certain and children are not present.
0-9 Keypad Number User can press 0-9 keypad number to select cook time, food class, food weight.
In standby mode, press the keypad button 1 or 2 or 3, the microwave oven
at 100% power for 1 min, 2 min, 3 min of cook time directly. No need press
START button to confirm.
Cook Time/Power Set Manual cooking
time and power
To set cooking time length and change power level:
1. Press the Cook Time/Power button.
2. Press the number buttons to set the length of cook time, for example
2:30, press number “2 3 0”.
3. Press the Cook Time/Power button again to change the power level.
4. Press number buttons to set the power levels, for example press “8 0”
to set the power level to 80%.
5. Press START button to Start.
You can skip step 3 and 4 if you want to cook at 100% power level.
Keep Warm Keep Warm The function allows to keep your dishes warm. To use:
1. Press “Keep Warm” button, default time “30:00” will show on the display.
2. Press “Keep Warm” or keypad 0-9 button to select 15 min, 30 min, 45
min or 60 min.
3. Press Start button.
NOTE: The Keep Warm cycle last for a duration of 15minutes (default 30
minutes), the maximum time is 60 min. Each 15 min cycle, microwave will
be turned on 1.5 min, then cavity lamp and fan are off, only the countdown
time is shown.
Steam Clean Auto cleaning cycle The cleaning cycle will help to clean the microwave oven cavity
1. Place 1 cup of water (~250mL) in the middle of the cavity.
2. Press “Steam Clean” button, default “11:00” time will show on display
3. Press the START button to start the function
(After finishing the water heat-up cycle (8 min), the cavity lamp and fan will
be off , the countdown time is shown.)
NOTE: Please follow Tips and Suggestions in Steam Clean section
Steam Clean Turn on or of beep sound The function allows to turn on or off the beep sound:
1. Press STEAM CLEAN button and hold for 3 seconds to put into mute,
the Mute Off icon will be shown on display
2. Hold the button again for 3 seconds to turn on the sound.
Bekijk gratis de handleiding van Whirlpool WMCS3019RS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WMCS3019RS |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 6598 MB |
