Handleiding
Je bekijkt pagina 8 van 60
Step 3: Prepare Air Conditioner for Installation
3A. Unpack the Air Conditioner
Remove Packaging Materials:
Gently handle the air conditioner while unpacking the unit.
Remove tape and glue residue from surfaces before
turning on the air conditioner. Rub a small amount of liquid
or abrasive cleaners to remove tape or glue. These products can
damage the surface of the air conditioner.
Remove any packaging materials inserted into the side louvers.
Dispose of/recycle packaging materials in an appropriate way.
3B. Remove filter and front panel
front panel upwards and remove from the air conditioner.
3C. Remove front panel and cabinet screws
Remove the four screws.
NOTE:The front panel screws must be reinstalled before
mounting the air conditioner.
Remove the cable connecting the display board.
3D. Remove the connection
3E. Remove chassis
Hold the cabinet while pulling on the base handle to install
the unit.
IMPORTANT: To avoid damage, do not pull or lift near the
top of the unit.
8
damp cloth and dry.
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
WARNING
Failure to do so can result in back or other injury.
Bekijk gratis de handleiding van Whirlpool WHAW-241IN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WHAW-241IN |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 7242 MB |
