Whirlpool WFW5720RR handleiding
Handleiding
Je bekijkt pagina 8 van 29
8
Cleaning the Drain Pump
Filter/Draining Residual Water
IMPORTANT: Make sure the washer is off before cleaning the
drain pump filter.
NOTE: Perform the following procedure occasionally.
1. Open the flap by pushing in on the flap. This will reveal
Drain pump
filter
2. Place a broad, flat container beneath the drain pump filter to
collect the drain water. Release the black hose from the hose
clip, remove the plug, and drain the hose into the container.
Empty the container. Repeat this procedure if necessary until
all the water has drained. Make sure that the black hose is
completely dry, replace the plug, and secure the hose in the
clip.
NOTE: If water does not drain well, push in hose slightly to
remove any possible kinks.
3. Lay a cotton cloth beneath the drain pump filter to absorb any
water still in it. Then remove the drain pump filter by turning it
counterclockwise.
4. Remove large clumps of lint by hand from the filter and place
lint in a suitable waste container. Remove remaining residue
from the filter by rinsing with water.
5. Reinsert the drain pump filter by turning it clockwise. Make
sure to turn it in as far as it will go, with the filter handle
remaining as close as possible to the vertical position.
Additional Cleaning
Gently pull back the rubber door seal and clean any stained areas,
soil buildup, or lint with the textured side of an affresh
®
Machine
Cleaning Wipe.
the drain pump filter. Remove the drawer by releasing the
tab on each side.
Bekijk gratis de handleiding van Whirlpool WFW5720RR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WFW5720RR |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 7893 MB |
