Whirlpool WDF341PAPT handleiding
Handleiding
Je bekijkt pagina 22 van 56
22
Option B: No waste disposer – no air gap
A
B
C
D
A. Waste tee
B. Drain trap
C. Drain hose
D. Large drain hose clamp
A
1
1. Fit rubber end (A) of drain hose to
waste tee and cut if needed.
NOTE: Do not cut ribbed section.
2. Attach rubber end of drain hose to
waste tee with a large drain hose clamp
(provided). Use pliers to squeeze clamp
open and move into position. If the
drain hose was cut, use a 1
1
/
2
" to 2"
(38 mm to 50 mm) screw-type clamp
(not provided).
Option C: Waste disposer – with air gap
A
B
C
D
E
F
G
A. Screw-type
clamps
B. Disposer inlet
C. Drain trap
D. Drain hose
E. Rubber hose connector
F. Large drain hose clamp
G. Air gap
Helpful Tip: Remove disposer knockout plug.
1
1. Using a hammer and screwdriver,
knock plug into disposer.
2
2. Use needle-nose pliers to remove plug.
A
3
3. Connect rubber end (A) of drain hose to
air gap and cut if needed.
NOTE: Do not cut ribbed section.
4
5
4. Attach drain hose to air gap with large
drain hose clamp (provided). Use pliers
to squeeze clamp open and move into
position. If the drain hose was cut, use
a 1
1
/
2
" to 2" (38 mm to 50 mm)
screw-type clamp (not provided).
5. Use a rubber hose (not provided) with
screw-type clamps (not provided) to
connect from air gap to disposer inlet.
Bekijk gratis de handleiding van Whirlpool WDF341PAPT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WDF341PAPT |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 10117 MB |
