Handleiding
Je bekijkt pagina 15 van 80
it will be needed.
4. SET START TIME DELAY
You can delay cooking before starting a function: The
function will start at the time you select in advance.
• Tap “DELAY” to set the start time you require.
You can either select the start time or the time
at which you would like the food to be ready
according to the selected functions.
• Once you have set the required delay, tap “SET” to
start the waiting time.
• Place the food in the oven and close the door: The
function will start automatically after the period of
time that has been calculated.
Programming a delayed cooking start time will disable
the oven preheating phase: The oven will reach the
temperature your require gradually, meaning that
cooking times will be slightly longer than those listed in
the cooking table.
• To activate the function immediately and cancel
the programmed delay time, tap “SKIP DELAY”.
5. START THE FUNCTION
• Once you have configured the settings, tap
“START” to activate the function.
If the oven is hot and the function requires a specific
maximum temperature, a message will be shown on
the display. You can change the values that have been
set at any time during cooking by tapping the value
you want to amend.
All the options available to be modified can be
explored by opening the three dots
menu in the
bottom left part of the display.
Temperature
Delay time
Cook time
Stop cooking
At any time you can stop the function that has been
activated by pressing
.
6. PREHEATING
If previously activated, once the function has been
started the display indicates the status of preheating
phase. Once this phase has been finished, an audible
signal will sound and the display will indicate “OVEN
READY.”
• Open the door.
• Place the food in the oven.
• Close the door and tap the “Start now” or the
“START” button
to start cooking.
Placing the food in the oven before preheating has
finished may have an adverse effect on the final
cooking result. Opening the door during the preheating
phase will pause it. The cooking time does not include
a preheating phase.
You can change the default setting of the preheating
option for cooking functions that allow you to do that
manually.
• Select a function that allows you to select the
preheating function manually.
• Use the Preheating dedicated toggle in the bottom
right of the display to activate or deactivate
preheating. It will be set as a default option.
7. TURN OR CHECK FOOD
Some Auto Modes will require the food to be turned
during cooking. An audible signal will sound and the
display shows the action to be done.
• Open the door.
• Carry out the action prompted by the display.
• Close the door, then tap “START” to resume
cooking.
In the same way, in the last 5% of the cook time,
before the end of cooking, the oven prompts you to
check the food.
An audible signal will sound and the display shows
the action to be done.
• Check the food
• Close the door, then tap “START” to resume
cooking.
8. END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete. With some
functions, once cooking has finished you can extend
the cooking time or save the function as a favorite.
• Tap “+ 5 min” to prolong the cooking
• Tap “ADD TO FAV” to save it as a favorite.
Please note: At the end of a steam cycle, open the door care-
fully in order to avoid water leakage.
WHEN THE APPLIANCE HAS COOLED DOWN:
1. Wipe the inner glass door and the condensation trim
with a cloth or a sponge.
2. Wipe the cavity surfaces paying particular attention not
to leave water deposits.
9. FAVORITES
The Favorites feature stores the oven settings for your
favorite recipe.
The oven automatically recognizes the most used
functions. After a certain number of uses, you will be
prompted to add the function to your favorites.
HOW TO SAVE A FUNCTION
Bekijk gratis de handleiding van Whirlpool WCT9A9PHTSBF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WCT9A9PHTSBF |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 12803 MB |
