Handleiding
Je bekijkt pagina 19 van 152
EN
Owner's Manual
400020023484
Policies, standard documentation and additional product information can be found by:
• Visiting our website docs . whirlpool. eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our
After-sales Service, please state the codes provided on your product's identication plate.
®/TM/© 2025 Whirlpool. Produced under license.
TROUBLESHOOTING
Problem Possible cause Solution
The oven is not switching on.
Power cut.
Disconnection from the mains.
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
The oven makes noises, even
when it is switched off.
Cooling fan active.
Open the door or hold or wait until the cooling process
has finished.
The display shows the letter
“F” followed by a number or
letter.
Software fault.
Contact our Call Center and state the number following
the letter “F”.
Press
, tap “Info” and then select “Factory Reset”. All
settings saved will be deleted.
The display shows F3E3.
The probe is not well connected or may not be
making contact properly.
First of all check the probe; if it is entered correctly but
the error persists, please call the Call Center. Notify the
error that appears on the display.
The oven does not heat up.
When “DEMO” is “On” all commands are active and
menus available but the oven doesn’t heat up.
The word DEMO appears on display every 60
seconds.
Access “DEMO” from “SETTINGS” and select “Off”.
The product resets every 10
seconds.
Oven failure. Contact the Call Center.
The oven display shows F8E8
(or inability to use the Steam
function because of failure
F8E8)
Excessive pollution of the water and steam
system.
Fill the drawer with clean water and then run the
cleaning/descale function. After the process is
completed, restart the descaling process using the
target solution with the descaler and then carry out the
process again.
If error F8E8 still appears, contact the nearest service
center.
Bekijk gratis de handleiding van Whirlpool WCT11A9FHTSSMAF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WCT11A9FHTSSMAF |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 24938 MB |
