Handleiding
Je bekijkt pagina 16 van 152
ATTENTION!
Observe these instructions when using the
microwave.
• If metal comes into contact with the cooking
compartment wall, sparks occur which can
damage the appliance or destroy the internal
glass of the door.
• Metal components, for example teaspoons
contained in glasses, must remain at a distance of
no less than 2 cm from the walls of the cooking
compartment and from the inside of the door.
Accessories placed directly on top of each other
generate sparks.
• Insert accessories only at their respective
heights.
• Sparks could form and damage the cooking
compartment.
• The appliance is damaged due to the formation
of sparks.
• Do not use aluminum trays in the appliance.
Operating the appliance without food inside the
cooking compartment leads to an overload.
• Never start the microwave oven without first
placing the food in it. The only exception allowed
is that of a short test for dishes.
damage caused by the use of other cleaning products
available on the market.
Once the descaling solution is poured inside the
drawer, press
to start the main descaling process.
The descaling phases do not need you to stay in front
of the appliance. After each phase is completed, an
acoustical feedback will be played and the display
will show instructions to proceed with the next
phase.
Once the descaling phase has been completed, the
boiler will be drained: the descaling solution used
during this phase will be poured into the extractable
drawer.
1+
= 75 g
+2
250 ml
3
» PHASE 2/2: RINSING (30 MIN.)
To remove descale residuals from the drawer and
the steam circuit, rinse cycle has to be done. When
display shows <ADD 0.25 L OF WATER> fill the tank
with 0,25 L of drinking water, then press
to start
the rinsing. Do not turn off the oven until all the steps
required by the function have been completed.
Please note: if needed from the system, it could be
requested to emty the drawer and to repeat this
operation.
When Descale procedure is completed, it is suggested
to dry the cavity from potential water residuals. It will
be then possible to use all the steam functions.
Please note: during the Descale cycle, some noise could
potentially be heard since the oven pumps are activated
in order to guarantee the optimal descale efficiency.
Once the maintenance cycle has started, do not remove
the drawer unless requested by the appliance.
Please note: After the boiler gets filled by the descaling
solution and the display shows “DESCALING PHASE 1/2”,
the cycle should not be interrupted and/or the door
opened, otherwise the entire descaling cycle must be
repeated before being able to run any steam function.
Bekijk gratis de handleiding van Whirlpool WCT11A9FHTSSMAF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WCT11A9FHTSSMAF |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 24938 MB |
