Handleiding
Je bekijkt pagina 13 van 76
• Tap the main function you require to access the
corresponding menu.
According to the selected function, you can activate
or deactivate the preheat with a specific toggle.
DURATION
You do not have to set the cooking time if you want
to manage cooking manually. In timed mode, the
oven cooks for the length of time you select. At the
end of the cooking time, the cooking is stopped
automatically.
• To set the duration, tap the Time section or the
“Set Cook Time” after pressing START.
• Tap the relevant numbers to set the cooking time
you require.
• Tap “NEXT” to confirm.
To cancel a set duration during cooking and so manage
manually the end of cooking, you can tap the duration
value and set “0” or you can open the three dots
menu and edit the cooking time.
If you want to stop the cycle, open the three dots menu
and select “Stop Cooking”.
3. SET AUTO MODES
The Auto Modes enable you to prepare a wide variety
of dishes, choosing from those shown in the list. Most
cooking settings are automatically selected by the
appliance in order to achieve the best results.
Furthermore, thanks to a special sensor able to
recognize the moisture content of the food, some
of the AUTO MODES functions allow you to achieve
optimal cooking for any kind of food without any
setting: the sensor will stop the cooking at the
perfect time. During the last few minutes of cooking
only, a countdown will appear on the display,
indicating the remaining cooking time.
• Choose a recipe from the list.
Functions are displayed by food categories in the “Auto
Modes” menu (see relative tables).
• Once you have selected a function, simply indicate
the characteristic of the food (quantity, weight, etc.)
you want to cook to achieve the perfect result.
COOKING WITH STEAM
By selecting the “Steam + Air inside the Manual
Functions or one of the several Auto Modes dedicated
recipes, it is possible to cook any kind of food, thanks
to the use of the steam. Steam spreads more quickly
and more evenly through food compared to just the
hot air typical of Conventional Functions: this reduces
cooking times, locking in food’s precious nutrients
and ensuring you obtain excellent, truly delicious
results with all your recipes.
To proceed with steam cooking, it will be necessary
to provide water to the boiler located inside the oven
using the extractable drawer on the control panel.
When requested on the display with ”FILL THE
DRAWER” indications, extract the drawer, open
drawer’s lid and fill it with drinking water until the
level requested on the display. Close the drawer
by pushing it carefully towards the panel until
completely closed. After the drawer insertion, press
START to proceed with the cooking cycle. The drawer
must always remain closed, except for water filling.
After the rst lling, in case of longer cooking cycles, once
water will have ran out, it could be necessary to add it again,
in order to complete the cycle: the oven will prompt it in case
it will be needed.
4. SET START TIME DELAY
You can delay cooking before starting a function: The
function will start at the time you select in advance.
• Tap “DELAY” to set the start time you require.
You can either select the start time or the time
at which you would like the food to be ready
according to the selected functions.
• Once you have set the required delay, tap “SET” to
start the waiting time.
• Place the food in the oven and close the door: The
function will start automatically after the period of
time that has been calculated.
Programming a delayed cooking start time will disable
the oven preheating phase: The oven will reach the
temperature your require gradually, meaning that
cooking times will be slightly longer than those listed in
the cooking table.
• To activate the function immediately and cancel
the programmed delay time, tap “SKIP DELAY”.
5. START THE FUNCTION
• Once you have configured the settings, tap
“START” to activate the function.
If the oven is hot and the function requires a specific
maximum temperature, a message will be shown on
the display. You can change the values that have been
set at any time during cooking by tapping the value
you want to amend.
All the options available to be modified can be
explored by opening the three dots menu in the
bottom left part of the display.
Bekijk gratis de handleiding van Whirlpool WCT11A9FHTSB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WCT11A9FHTSB |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 12734 MB |
