Handleiding
Je bekijkt pagina 8 van 70
FIRST TIME USE
1. SELECT THE LANGUAGE
You will need to set the language and the time when
you switch on the appliance for the first time:
“English” will show on the display.
English
Press or to scroll through the list of available
languages and select the one you require.
Press to confirm your selection.
Please note: The language can subsequently be changed
by selecting “LANGUAGE” in “SETTINGS” menu, available by
pressing .
2. SET THE TIME
After selecting the language, you will need to set the
current time: The two digits for the hour will flash on
the display.
CLOCK
Press or to set the correct hour and press :
The two digits for the minutes will ash on the display.
Press or to set the minutes and press to
conrm.
Please note: You may need to set the time again following
lengthy power outages. Select “CLOCK” in “SETTINGS” menu,
available by pressing .
3. SET THE POWER CONSUMPTION
The oven is programmed to consume a level of
electrical power that is compatible with a domestic
network that has a rating of more than 3 kW (16): if
your household uses a lower power, you will need to
decrease this value (13).
POWER
Press to enter “SETTINGS” menu, then select
“POWER” and select desired power setting.
Press
or to select 16 “High” or 13 “Low” and press
to confirm.
4. SET THE WATER HARDNESS LEVEL
In order to allow the oven to work efficiently, and
to guarantee that it regularly prompts the user to
perform Descale cycle when needed, it is important
to set the correct water hardness level. To set it,
switch on the oven by pressing
, press .
Settings and use navigation buttons
and to
select “WATER HARDNESS”. Press to confirm.
Use navigation buttons
and to select the
correct level for the water of your area, based on the
following table:
Press
to confirm.
For Water Hardness level, “Hard” is preset.
WATER HARDNESS LEVELS TABLE
Level
°dH
German
degrees
°fH
French
degrees
°Clark
English
degrees
1 Very soft 0-6 0-10 0-7
2 Soft 7-11 11-20 8-14
3 Mid 12-16 21-29 15-20
4 Hard 17-34 30-60 21-42
5
Very
hard
35-50 61-90 43-62
5. HEAT THE OVEN
A new oven may release odours that have been left
behind during manufacturing: This is completely
normal.
Before starting to cook food, we therefore
recommend heating the oven with it empty in
order to remove any possible odours. Remove any
protective cardboard or transparent film from the
oven and remove any accessories from inside it. Heat
the oven to 200 °C for around one hour, ideally using
a function with air circulation (e.g. “Forced Air” or
“Convection Bake”).
Please note: It is advisable to air the room after using the
appliance for the rst time.
DAILY USE
1. SELECT A FUNCTION
Press to switch on the oven: the display will show
the last running main function or the main menu.
The functions can be selected by pressing the icon
for one of the main functions or by scrolling through
a menu: To select an item from a menu (the display
will show the first available item), press
or to
select the desired one, then press
to confirm.
2. SET THE FUNCTION
After having selected the function you require, you
can change its settings. The display will show the
settings that can be changed in sequence. Pressing
allows you to change the previous setting again.
TEMPERATURE / GRILL LEVEL / STEAM LEVEL
TEMPERATURE
When the value flashes on the display, press
or
to change it, then press to confirm and
continue with the settings that follow (if possible).
In the same way, it is possible to set the grill level:
There are three defined power levels for grilling: 3
(high), 2 (mid), 1 (low).
In “Forced Air + Steam” function, you can select the
amount of steam from the following values: STEAM 1,
STEAM 2.
Bekijk gratis de handleiding van Whirlpool WCS7A9PHTSSGA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | WCS7A9PHTSSGA |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 12101 MB |
