Whirlpool W8F HS61X handleiding
Handleiding
Je bekijkt pagina 8 van 132
EN
Daily Reference Guide
8
The dishes are not
dried well.
Rinse aid is not present or the dosage is too
low.
Make sure the rinse aid dispenser is lled (see FILLING THE RINSE AID DISPENSER).
Multifunctional tablets only will not provide as good drying eects as the actual use
of liquid rinse aid.
The dishes have been unloaded after the
door was opened automatically but before
the actual cycle end.
Make sure the cycle has ended before starting to unload the dishes (see DAILY USE).
For even better drying results, it is recommended to let the dishes sit inside the dish-
washer with the door open for additional 15 minutes after the cycle ends.
The dishes are sitting too at.
If you notice puddles of water inside cavities of cups, mugs or bowls, try loading the
dishes (especially in the upper rack) providing more inclination to let larger amounts
of water drip down before drying starts.
The selected cycle does not have the dry-
ing phase.
Please check in the PROGRAMS TABLE if the selected program is equipped in the
drying phase.
A cycle without the drying phase may not deliver desired drying eciency, so it is
recommended to change cycle selection for the one that has the drying phase.
The dishes are made of non-stick or plastic. Some water drops remaining on this type of material are normal.
Dishes and
glasses have blue
streaks
or bluish tinges.
Rinse aid dosage is excessive. Adjust the dosage to a lower setting.
Dishes and glass-
es are covered
with limescale or
a whitish lm.
The salt reservoir is empty.
Rell the reservoir with salt as soon as possible. Using the appliance without salt may
cause damage to its internal components.
The water hardness setting is too low. Increase the setting (see WATER HARDNESS TABLE).
The cap of the salt reservoir is not properly
closed.
Check and close the salt reservoir cap.
The rinse aid reservoir is empty or the rinse
aid dosage is insucient.
Rell the dispenser with rinse aid and check the dosage setting (for more information - see
FILLING THE RINSE AID DISPENSER).
The dishwasher
shows F8 E5
Valve is blocked or faulty. Close the water tap, if possible. Do not switch o the power supply. Call the service.
Detergent leaks.
Depends on the liquid detergent used and
can be emphasized in case of delay option
is activated.
Small leaks will not cause machine malfunction and can be avoided by changing
liquid detergent type or using tablets.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website docs.whirlpool.eu/docs and parts-selfservice.europeanappliances.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales
Service, please state the codes provided on your product’s identication plate.
The model information can be retrieved using the QR-Code reported in the energy label.
The label also includes the model identier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
IEC 436
:
®/TM/ © 2025 Whirlpool, Produced under license
Bekijk gratis de handleiding van Whirlpool W8F HS61X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | W8F HS61X |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 32632 MB |
