Handleiding
Je bekijkt pagina 29 van 108
EN / 29
The butane end piece allows connection
using flexible rubber hosing with 6 mm in-
ternal diameter suitable for bottle gas.
The end piece for piped gas allows con-
nection by bendy piping of 15 mm internal
diameter, such piping being strengthened
so that it can be mandatorily held in place
by a locking collar. Use piping carrying the
NF-GAZ stamp. This piping is regularly to
be replaced before its use expiry date.
Do not use a lighter or a match to
check for a gas leak.
Checking seal-tightness : Make
sure that all knobs on the stove are
in the off position and the gas
bottle connection is open. Use soap
to check for any gas leaks. Any leak
will cause the soap to bubble. If this
happens, check the gas connection
again.
Using a cooking appliance with
piped gas leads to heat and humid-
ity being produced in the area
where the appliance is installed.
Make sure there is good ventilation
in the space where the appliance is
installed. Keep all natural ventila-
tion apertures open, or install a
mechanical ventilation device such
as an extraction hood. Prolonged or
intensive use of the appliance may
call for additional ventilation such
as opening windows, or for more ef-
fective ventilation by increasing the
power of the extraction hood if any.
4.4 Placing the product
1. Push the product towards the kitchen
wall.
2. Secure the safety chain you have con-
nected to the product to the wall.
3. Adjust the feet of oven
Adjusting the feet of oven
Vibrations during use may cause cooking
vessels to move. This dangerous situation
can be avoided if the product is level and
balanced.
For your own safety please ensure the
product is level by adjusting the four feet at
the bottom by turning left or right and align
level with the work top.
Final check
1. Reconnect the product to the mains.
2. Check electrical functions.
3. Open gas supply.
4. Check whether the gas connections are
securely attached and whether there are
any leaks.
5. Ignite burners and check appearance of
the flame.
Flame must be blue and have a reg-
ular shape. If the flame is yellowish,
check if the burner cap is seated
securely or clean the burner.
4.5 Gas Conversion
General information
• Before starting any work on the gas in-
stallation, disconnect the gas main sup-
ply. There is the risk of explosion!
• All gas injectors must be replaced and
the burning adjustment of the gas taps
must be made in reduced flow rate posi-
tion in order to make the product suitable
for use with another gas.
• After the gas type has been changed, the
new gas type label on the spare bag must
be applied onto the current label already
on the backwall of product.
EN
CS
Bekijk gratis de handleiding van Whirlpool W6G8LMSWW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | W6G8LMSWW |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 12051 MB |
