Handleiding
Je bekijkt pagina 25 van 108
EN / 25
• The electric cable must not be crushed,
folded, jammed or touch hot parts of the
product. If the electric cable is damaged,
it must be replaced by a qualified electri-
cian. Otherwise there is an electric shock,
short circuit or fire hazard!
• The mains supply data must correspond
to the data specified on the type label of
the product. The rating plate is either
seen when the door or the lower cover of
the appliance is opened or it is located at
the rear wall of the appliance depending
on the appliance type.
• and must use the appropriate socket out-
let/line and plug for oven. In case of the
product's power limits are out of current
carrying capability of plug and socket
outlet/line, the product must be connec-
ted through fixed electrical installation
directly without using plug and socket
outlet/line.
If your appliance has a cord and plug:
Perform the electrical connection of your
appliance by plugging it to a grounded
socket.
4.3 Gas connection
• There is risk of explosion, fire and toxica-
tion could be occur if installation, repair
or connection are made from unauthor-
ised/unlicensed/ unqualified person or
technician.
• Before placing the product, make sure
that the local distribution conditions (gas
type and pressure) and whether the
product gas setting complies with these
conditions. Gas adjustment conditions
and values of the product are located on
the labels (or type label).
• If your country code is not on the label,
follow the local technical instructions for
your country for gas connection and con-
version.
• Product can be connected to gas supply
system only by an authorised/licensed/
qualified person or technician.
• Manufacturer shall not be held respons-
ible for damages arising from procedures
carried out by unauthorised/unlicensed/
unqualified person or technician.
• Before starting any work on the gas in-
stallation, disconnect the gas supply.
There is the risk of explosion!
• If you need to use your product later with
a different type of gas, you must consult
the authorised/licensed/ qualified person
or technician for the related conversion
procedure.
• Make sure that the gas connection is
checked well for tightness after each
use. The manufacturer cannot be held re-
sponsible for any damages that may
arise due to gas leakage that may occur
as a result of gas connection or conver-
sion made by unauthorized/non-licensed
persons.
• If you do not make the connection ac-
cording to the instructions below, there
will be the risk of gas leakage and fire.
Our company cannot be held responsible
for damages resulting from this.
• Gas connection must be made by an au-
thorised/licensed/ qualified person or
technician only.
• Make sure that the gas hose to be used
in the gas connection complies with the
local gas standards.
• The flexible gas hose must be connected
in a way that it does not contact the mov-
ing parts and hot surfaces (shown below
figures) around it and is not trapped
when the moving parts are travelling.
(e.g. drawers). Besides, it should not be
placed in spaces where it might get
squeezed.
• Do not move the product whose gas con-
nection is complete. If it is moved, there
may be a risk of gas leakage.
• A spanner must be used for gas connec-
tion and conversion.
Gas connection hose placement
• The gas hose should be connected by
making wide-angle turns against the pos-
sibility of breaking and folding during the
connection.
EN
CS
Bekijk gratis de handleiding van Whirlpool W6G8LMSWW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | W6G8LMSWW |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 12051 MB |
