Handleiding
Je bekijkt pagina 4 van 36
DAILY USE
1. SELECT A FUNCTION
To select a function, turn the selection knob to the
symbol for the function you require: the display will
light up and an audible signal will sound.
2. ACTIVATE A FUNCTION
MANUAL
To start the function you have selected, turn the
thermostat knob to set the temperature you require.
Please note: During cooking you can change the function by
turning the selection knob or adjust the temperature by
turning the thermostat knob. The function will not start if the
thermostat knob will be on
. You can set the cooking
time, cooking end time (only if you set a cooking time) and a
timer.
RISING
To start the “Rising” function, turn the thermostat
knob to Rising position (40 deg) and put function
knob in Conventional position if the oven is set to a
different temperature, the function will not start.
Please note: You can set the cooking time, cooking end time
(only if you set a cooking time) and a timer.
3. PREHEATING AND RESIDUAL HEAT
Once the function starts, an audible signal and a
flashing icon
on the display indicate that the
preheating phase has been activated.
At the end of this phase, an audible signal and the
fixed icon
on the display will indicate that the
oven has reached the set temperature: at this point,
place the food inside and proceed with cooking.
Please note: Placing the food in the oven before preheating
has nished may have an adverse eect on the nal cooking
result.
After cooking and with the function deactivated,
the icon
may continue to remain visible on the
display even after the cooling fan has switched
off to indicate that there is residual heat in the
compartment.
Please note: The time after which the icon switches o varies
because it depends on a series of factors such as ambient
temperature and function used. In any case, the product
should be considered to be o when the pointer on the
selection knob is at “0”.
4. PROGRAMMING COOKING
You will need to select a function before you can start
programming cooking.
DURATION
Keep pressing until the icon and “00:00” start
flashing on the display.
Use or to set the cooking time you require, then
press
to confirm.
Activate the function by turning the thermostat knob
to the temperature you require: an audible signal will
sound and the display will indicate that cooking is
complete.
Please note: To cancel the cooking time you have set, keep
pressing until the icon starts flashing on the display,
then use to reset the cooking time to “00:00”. This
cooking time includes a preheating phase.
PROGRAMMING THE END COOKING TIME/
DELAYED START
After a cooking time has been set, starting the
function can be delayed by programming its end
time: press
until the icon and the current time
start flashing on the display.
Use or to set the time you want cooking to end
and press
to confirm.
Activate the function by turning the thermostat
knob to the temperature you require: the function
will remain paused until it starts automatically after
the period of time that has been calculated in order
forcooking to finish at the time you have set.
Please note: To cancel the setting, switch the oven off by
turning the selection knob to the position.
Delay to start functionality is not available for Grill
and Turbo Grill function.
END OF COOKING
An audible signal will sound and the display will
indicate that the function has finished.
Turn the selection knob to select a different function
or to
to switch the oven off.
Please note: If the timer is active, the display will show “END”
alternately with the remaining time.
Bekijk gratis de handleiding van Whirlpool OWR55PR0X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | OWR55PR0X |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5601 MB |
