Whirlpool FFL 7269 W EE handleiding
Handleiding
Je bekijkt pagina 3 van 98
selected delay period will begin to ash. As time passes, the remaining
delay will be displayed and the corresponding indicator light will ash.
The set programme will start once the selected time delay has expired.
To cancel the delayed start, press the button until all LED lights are
switched o.
Temperature
Every programme has a predened temperature. If you want to change
the temperature, press the “ ” button. The corresponding LED indicator
lights up.
Spin
Every programme has a predened spin speed. If you want to change
the spin speed, press the “ ” button. The corresponding LED indicator
lights up.
KEY LOCK
To lock the control panel, press and hold the “Key lock” button for
approximately 3 seconds. The corresponding LED indicator lights up
to indicate that the control panel has been locked (with the exception
of the “ON/OFF“ button). This prevents unintentional changes to
programmes, especially with children near the machine. To unlock the
control panel, press and hold the “Key lock” button for approximately 3
seconds.
BLEACHING
If you wish to bleach the laundry, load the washing machine and set the
“Rinse & Spin ” programme.
Start the machine and wait for it to complete the rst water lling cycle
(roughly 2 minutes). Put the machine in pause mode by pressing the
“Start/Pause” button, open the detergent drawer and pour the
bleach (observe the recommended doses indicated on the package)
into the main wash compartment where the partition was previously
mounted. Restart the cycle by pressing the “Start/Pause” button.
If desired, it is possible to add fabric softener into the appropriate
compartment of the detergent drawer.
HINTS AND TIPS
Sort your laundry according to
Type of fabric/care label (cotton, mixed bres, synthetics, wool, handwash
items). Colour (separate coloured and white items, wash new coloured
items separately). Delicates (wash small items – like nylon stockings – and
items with hooks – like bras – in a cloth bag or pillow case with zip).
Empty all pockets
Objects like coins or lighters can damage your laundry as well as the
drum.
Follow the dosage recommendation / additives
It optimizes the cleaning result, it avoids irritating residues of surplus
detergent in your laundry and it saves money by avoiding waste of
surplus detergent
Use low temperature and longer duration
The most ecient programmes in terms of energy consumption are
generally those that perform at lower temperatures and longer duration.
Observe the load sizes
Load your washing machine up to the capacity indicated in the
“PROGRAMME CHART” table to save water and energy.
Noise and remaining moisture content
They are inuenced by the spinning speed: the higher the spinning
speed in the spinning phase, the higher the noise and the lower the
remaining moisture content.
CLEANING & MAINTENANCE
For any cleaning and maintenance, switch o and unplug the washing
machine. Do not use ammable uids to clean the washing machine.
Clean and maintain your washing machine periodically (at least 4 times
per year).
Cleaning the outside of the washing machine
Use a soft damp cloth to clean the outer parts of the washing machine.
Do not use glass or general purpose cleaners, scouring powder or
similar to clean the control panel – these substances might damage the
printing.
Checking the water supply hose
Check the inlet hose regularly for brittleness and cracks. If damaged,
replace it by a new hose available through our After-Sales Service or
your specialist dealer. Depending on the hose type:
If the inlet hose has a transparent coating, periodically check if the
colour intensies locally. If yes, the hose may have a leak and should be
replaced.
Cleaning the water lter / draining residual water
If you used a hot wash programme, wait until the water has cooled
down before draining any water. Clean the water lter regularly, to
avoid that the water cannot drain after the wash due to obstruction of
the lter. If the water cannot drain, the display indicates that the water
lter may be clogged.
Remove the plinth by using the screwdriver: push downwards one side
of the plinth with your hand, then push the screwdriver into the gap
between plinth and front panel and pry open the plinth. Place a broad,
at container beneath the water lter, to collect the drain water. Slowly
turn the lter counterclockwise until water ows out. Let the water ow
out, without removing the lter. When the container is full, close the
water lter by turning it in clockwise. Empty the container. Repeat this
procedure until all the water has drained. Lay a cotton cloth beneath
the water lter, which can absorb a small amount of rest water. Then
remove the water lter by turning it out anti clockwise. Clean the water
lter: remove residues in the lter and clean it under running water.
Insert the water lter and reinstall the plinth: Reinsert the water lter
again by turning it in clockwise direction. Make sure to turn it in as far
as it goes; the lter handle must be in vertical position. To test water
tightness of the water lter, you can pour about 1 liter of water into the
detergent dispenser. Then reinstall the plinth.
Cleaning the detergent dispenser
Remove the detergent dispenser by pressing on the release button
and at the same time pulling out the detergent dispenser. Remove
the insert from the detergent dispenser, as well as the insert of the
softener compartment. Clean all parts under running water, removing
all detergent or softener residues. Wipe the parts dry with a soft cloth.
Reinstall the detergent dispenser and push it back into the detergent
compartment.
ACCESSORIES
Contact our After-Sales Service to check if the following accessories are
available for your washing machine model.
Stacking kit shelf
By which your dryer can be xed on top of your washing machine to
save space and to facilitate loading and unloading your dryer in the
higher position.
TRANSPORT AND HANDLING
Never lift the washing machine by holding it at the worktop.
Pull out the mains plug, and close the water tap. Make sure that door
and detergent dispenser are properly closed. Disconnect the inlet hose
from the water tap, and remove the drain hose from your draining
point. Remove all rest water from the hoses, and x them so that they
cannot get damaged during transport. Ret the transport bolts. Follow
the instructions for removing the transport bolts in the INSTALATION
GUIDE in reverse order.
EN
Quick guide
Bekijk gratis de handleiding van Whirlpool FFL 7269 W EE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Whirlpool |
| Model | FFL 7269 W EE |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 17674 MB |
