Westinghouse WSTT20V handleiding
Handleiding
Je bekijkt pagina 5 van 41
English
|
5
SAFETY
WARNING
READ AND UNDERSTAND ALL
INSTRUCTIONS. Failure to follow all instructions list-
ed below and on the machine may result in electric
shock, re, and/or serious personal injury.
z For safe operation, read and understand all instructions
before using this product. Follow all safety instructions.
Failure to follow all safety instructions listed can result in
serious personal injury.
z Do not allow children or untrained individuals to use this
unit.
z Inspect the work area before each use. Remove all objects
that can be thrown or become entangled in the machine.
z Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Following this rule will reduce
the risk of serious personal injury.
z Use Safety Glasses – Wear a face or dust mask if the
operation is dusty. Always wear safety glasses with side
shields. Everyday glasses have only impact resistant
lenses. They are NOT safety glasses. Following this rule
will reduce the risk of eye injury.
z Protect your lungs. Wear a face or dust mask if the op-
eration is dusty. Following this rule will reduce the risk of
serious personal injury.
z Dress Properly – Do not wear loose clothing or jewelry.
They can be caught in moving parts. Use of rubber gloves
and substantial footwear is recommended when working
outdoors. Wear heavy, long pants, long sleeves, boots, and
gloves. Do not wear short pants, sandals, or go barefoot.
Do not wear jewelry of any kind.
z Secure long hair above shoulder level to prevent entan-
glement in moving parts.
z Keep children away – Keep all bystanders, children, and
pets at least 50 ft. away.
z Stay alert – Do not operate this unit when you are tired,
ill, upset, or under the inuence of alcohol, drugs, or
medication.
z Do not operate in poor lighting.
z Keep all body parts away from any moving part on this unit.
z Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases, or
dust. Power tools create sparks which may ignite the
dust or fumes.
z Avoid body contact with grounded surfaces such as pipes,
radiators, ranges, and refrigerators. There is an increased
risk of electric shock if your body is grounded.
z Avoid Dangerous Environments – Don’t expose the string
trimmer to rain or wet conditions. Water entering the string
trimmer will increase the risk of electric shock.
z Use Right Appliance – Do not force the tool. Use the cor-
rect tool for your application. The correct tool will operate
better and safer at the rate for which it is designed.
z Don’t Force Appliance – It will operate better and with
less likelihood of a risk of injury at the rate for which it
was designed.
z Do not operate the equipment while barefoot or when
wearing sandals or similar lightweight footwear. Wear
protective footwear that will protect your feet and improve
your footing on slippery surfaces.
z Do not overreach – Keep rm footing and balance. Over-
reaching can result in a loss of balance.
z Avoid accidental starting – Be sure the switch trigger is
in the locked or off position before inserting the battery
pack. Carrying tools with your nger on the switch trigger
or inserting the battery pack into a tool with the switch on
increases the risk of injury.
z Do not use the tool if the switch trigger does not turn it on
or off. Any tool that cannot be controlled with the switch
trigger is dangerous and must be repaired. Contact
Customer Service.
z Disconnect battery pack – Disconnect the battery pack from
the appliance before servicing or changing accessories.
Preventive safety measures reduce the risk of starting
the tool accidentally.
z Only use identical accessories from the manufacturer.
Use of any other parts may create a hazard or cause
product damage.
z Maintain appliance with care – Replace the string head
if it is cracked, chipped, or damaged. Be sure the string
head is installed properly and fastened securely. Failure
to do so can cause serious injury. Keep the handles dry,
clean, and free from oil and grease.
z Inspect for damaged parts – Before use of the tool, any
part that is damaged should be carefully inspected to
determine that it will operate properly and perform its
intended function. Inspect for alignment of moving parts,
binding of moving parts, breakage of parts, mounting,
and any other conditions that may affect the operation.
z Be sure all guards, straps, deectors and handles are
attached securely.
z Use only the recommended replacement line in the cutting
head. Do not use any other cutting attachment. To install
any other brand of cutting head to this string trimmer can
result in serious personal injury.
z Never operate the unit without the guard in place and in
good condition.
z Maintain a rm grip on both handles while trimming. Keep
the string head below waist level. Never use with the
string head located over 30 in. or more above the ground.
Bekijk gratis de handleiding van Westinghouse WSTT20V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | WSTT20V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4393 MB |
