Westinghouse WSTT20V handleiding
Handleiding
Je bekijkt pagina 12 van 41
12
|
English
PROBLEM POSSIBLE CAUSE CORRECTION
Trimmer runs slowly
Check that the spool housing can rotate
freely
Carefully clean it if necessary
Check that the cutting line does not pro-
trude more than approximately 5-3/8 inches
(136mm) from the spool.
If it does, cut it off so that it just reaches the
line trimming blade.
Trimmer will not start
Battery pack not installed properly Check battery pack installation
Battery pack not charged Check battery pack charging requirements
Battery pack will not
charge
Surrounding air temperature too hot or too
cold
Move charger and tool to a surrounding air
temperature of above 40 degree F (4.5°C) or
below 105 degree F (+40.5°C).
Charger not plugged in
Plug charger into a working outlet.
Check current at receptacle by plugging in
a lamp or other appliance.
Check to see if receptacle is connected to a
light switch which turns power off when you
turn out the lights.
Battery pack not inserted into charger
Insert battery pack into charger until red
LED appears
TROUBLESHOOTING
Bekijk gratis de handleiding van Westinghouse WSTT20V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | WSTT20V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4393 MB |
