Westinghouse WSE6200WB handleiding
Handleiding
Je bekijkt pagina 7 van 16
Using the control panel
Refrigerator temperature display
Zone select button
Temperature adjust button
Quick Freeze Icon
Quick Chill Icon
Eco Icon
Feature Button
Display lock Icon
Lock/Unlock Button
•
•
((Door Alarm))
Freezer temperature
display
Function setting of the LED display
Note: the display will turn off after 20 seconds of inactivity, while the display will wake up if the button is touched again.
Feature
Selection - each press
of
the
“Mode”
button will
cycle
through the operating modes.
Lock button - Press the “LOCK hold 3sec” button to enable the lock mode . The lock icon will be
visible. While the refrigerator is in this mode the other buttons on the control panel will not
function, when the buttons are touched the lock icon will flash. To exit lock
mode, press and hold
the lock button for 3 seconds until the icon is no longer displayed.
Open
door alarm - when the
refrigerator or freezer door is left open for more than 1 minute the
alarm
will sound to alert that
the door is open. Closing the door will disable the alarm. The alarm
will
continue every 30
seconds until the door is closed.
Using the control panel 7
Eco Mode - The refrigerator will run at 4°c while the freezer will operate at -16°c.
Limit door opening during Eco mode.
The Eco mode can be turned off either by pressing the "Mode" button to deactivate or by
pressing "Temperature" button to change temperature setting.
•
Quick Freeze
mode -
When the
Quick Freeze
mode is selected, the compressor will operate
continuously to freeze foods faster, and keep them fresh.The
Quick Freeze
mode will
automatically turn off either after 24 hours of operation, or when the freezer reaches -28°C.
The
Quick Freeze
icon will turn off, and the freezer will continue to operate at the normal set
temperature.
Quick Chill Icon
-
When the
Quick Chill
mode is selected, the fridge compartment reaches
the
set temperature in the shortest period,in order to keep the food as fresh as possible.under
this
mode,the set temperature of the fridge compartment locks on 2°C. The program runs
150mins
maximally then exits automatically, the
Quick Chill
icon goes out,which represent the
Quick
Chill
function is disable,the set temperature returns to the last one before the
Quick Chill
mode operates.
Freezer compartment settings - the default temperature of the freezer is -18°c.
To change the temperature press the “Zone” button, when the freezer zone icon is
flash, then press “Temperature”to adjust the freezer zone temperatures.
The freezer zone temperature setting range: -15°C~ -23°C.
Fridge compartment settings - the default temperature of the refrigerator is
4°c.
To change the temperature press the “Zone”
button,
when the fridge zone
icon is flash, then press “Temperature”to adjust the fridge zone temperature.
The fridge zone temperature setting range: 2°C~ 8°C.
Bekijk gratis de handleiding van Westinghouse WSE6200WB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | WSE6200WB |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 1809 MB |
