Westinghouse WQE5400SD handleiding
Handleiding
Je bekijkt pagina 29 van 36
29
EN
Crisper Operation
CONCERN WHAT TO DO
Excess moisture build up in
crisper
It is normal for there to be some
moisture and humidity in the
crisper bin.
• Ensure that the crisper is not over packed.
• Adjust crisper humidity slides.
• To recommend using food wrapper (Cling film) as below shared picture or
zip lock bag.
Crisper bin can not be removed • If crisper bin interferes with the door bins, remove door bins before
removing crisper.
• Position cabinet so that the door can be fully opened.
Freezing items in the crisper • Adjust temperature to a warmer setting.
Refrigerator operation
CONCERN WHAT TO DO
Appliance will not run
It is normal for the freezer
fan not to operate during the
automatic defrost cycle, or for a
short time after the appliance is
switched on.
• Ensure that the cord is plugged into a live power outlet and outlet is
switched on.
• Ensure that the household circuit breaker has not tripped or that the fuse
has not blown.
• The appliance maybe in defrost mode, check again in half an hour.
Compressor motor seems to
run too long
At normal room temperatures,
expect your motor to run about
40% to 80% of the time. Under
warmer conditions, expect it to
run more often.
• Ensure that the doors are not held open.
• Check that large amounts of warm food have not just been placed inside
the appliance.
• Note that the appliance will run more than normal just after you install it
or when adjusting the temperature setting changes.
Compressor motor seems to
run too long.
These appliances use a variable
speed compressor, which by
design can run for long periods
of time, this is normal
• The variable speed compressor and fan that at start up and on warm
days, runs at high speeds to provide additional cooling. When less cooling
is required the compressor and fan will run at a lower speed, but still may
not switch o. This is normal.
• It is possible that the only time the compressor and fan will stop is when
the refrigerator is defrosting which is approximately once per day.
The exterior of the appliance is
warm or hot to touch
This is normal because the
appliance transfers heat from
the inside out through the outer
panels and the divider between
the doors.
• Ensure the appliance has the external clearances recommended in the
section “Installing your new appliance”.
• The exterior of the cabinet will be much warmer on warmer days it may
even feel hot to touch, as the appliance is working harder.
Bekijk gratis de handleiding van Westinghouse WQE5400SD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | WQE5400SD |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3444 MB |
