Westinghouse WQE5400SD handleiding
Handleiding
Je bekijkt pagina 14 van 36
14 www.westinghouse.com
FUNCTIONS OF THE USER INTERFACE
French door ice & water models
FUNCTION. ICON OPERATION
Setting the freezer temperature
• Press button 1 until freezer is displayed on icon 3.
• Press buttons 3 (Increase /Decrease) to adjust
temperature up or down.
Setting the refrigerator temperature
• Press button 1 until the refrigerator is displayed on icon 3.
• Press buttons 3 (Increase /Decrease) to adjust
temperature up or down.
Display Lock
Deactivates the user interface controls.
• To turn on/o press and hold button 1 for 3 seconds, the
lock icon is illuminated when activated.
Freeze Boost is a freezer function.
It ignores the user set temperature
(turn "OFF" thermostat) and put the
compressor running all the time for 12
hours. When Quick Freeze ends, the
appliance will adjust back to the user
set temperature.
Figure : Freeze Boost
5.6.1 Activate/Deactivate Freeze Boost
To activate the ‘Freeze Boost’, tap on the “Freeze Boost” key.
• The “Freeze Boost’ icon becomes 100% illuminated.
• The numerical display will show the lowest freezer temp
setting.
• Play Tone_Confirm.
To deactivate ‘Freeze Boost’ tap on the “Freeze Boost” key.
• The “freeze boost” icon becomes 0% illuminated;
• The numerical display will show the previous set temp
• Play Tone_Cancel
Ice & Water on/o
Enables/disables ice maker and water
dispensing features.
The ‘Ice & Water On/O’ key provides 4 toggle interactions
• 1
st
Tap - turns o the Icemaker
• 2
nd
Tap - turns o the Water Dispenser
• 3
rd
Tap - turns o both the Icemaker and Water Dispenser
• 4
th
Tap - turns on both the Icemaker and Water Dispenser
Sabbath Mode
Disables all lights and other electrical
activity from occurring when the
refrigerator door is opened.
To activate/deactivate sabbath mode, Press and hold “ –“ and
“Ice & Water On/O” keys for 10 seconds.
On detection of 10 seconds holding:
• Play tone_Confirm and
• Blink “t” once on internal UI segement display (All other
LEDs turns o)
• UI reverts to previous
NOTE: All alarm functions are deactivated except High
temperature alarm is not disabled for health reasons. If high
temp alarm active, The alarm will sound intermittently for 10
minutes. The alram will silence on its own.
The unit stays in Sabbath Mode after power outage recovery.
It must be deactivated by the user.
INDICATOR ICON OPERATION
Order Filter
Reminder when the water filter
periodically requires replacement.
• Order filter icon will appear as a reminder to order a
replacement water filter.
• When the filter has been replaced press and hold button 9
for 3 seconds to reset the filter replacement timer.
Replace Filter
Reminder when the water filter requires
replacement.
• Replace filter icon and alarm will activate as a reminder to
replace the water filter.
• Mute alarm for 1 week by pressing any button on the user
interface.
• When the filter has been replaced press and hold button
14 for 3 seconds to reset the filter replacement timer.
Bekijk gratis de handleiding van Westinghouse WQE5400SD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Westinghouse |
| Model | WQE5400SD |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3444 MB |
